Triggers

Timney trigger mosin-nagant rifles fdmn

FEATURES
-Adjustable Mosin Nagant Drop in Trigger
-Adjustable trigger pull, 1.5 to3 pounds
-Anodized 6061-T6 cage
-Trigger block safety

Other Features: Adjustable 1.5-3 lbs

Timney trigger mossberg 100atr w/safety black long action

FEATURES
-Self-contained drop in trigger
-Lightweight aluminum housing with Wire EDM cut, heat treated steel trigger & sear
-Two position, trigger blocking side safety
-Fully adjustable Sear Engagement & pull weight from 1.5-4lbs
-Black
-Teflon nickel coated Sear to guarantee a lifetime of service
-Made in USA

Timney trigger howa 1500 3lb w/safety black

Timney trigger ruger 77 w/tang safety nickel

FEATURES
-Self-contained drop in trigger
-Fits Ruger Model 77®-Tang Safety
-Good crisp 1.5 - 3.5 pound pull
-Lightweight alloy housing
-Made in the USA
-Nickel-plated

Other Features: Will not fit ruger mark ii, adjustable from 1.5-4lbs.

Elftmann trigger ar-9 straight adjustable 2.75-4lbs.Mil-spec

FEATURES
-Fits any mil-spec AR platform
-Compatible w/ Sig MPX which was used extensively in development
-Absolutely Drop-Safe regardless of pull-weight
-Straight trigger

Other Features: Fully adjustable 2.75-4# pull, specifically developed for 9mm and.45pcc platforms, u- shpaed captured disconnector for positive hold, made in usa lifetime guarantee, 100% drop-safe design, skeletonized trigger, 50% lighter than standard ar platform trigger

Cmc trigger anti-walk pin set ar-15 small pins

FEATURES:
-Self-contained & easy-to-install AR-15 trigger groups
-Anti-walk pins
-Steel
-Small pins

Elftmann trigger ar-15 match straight adjustable 2.75-4lbs.

FEATURES:
-Straight
-Fits any mil-spec AR-15
-Absolutely Drop-Safe regardless of pull-weight
-Factory set pull-weight is approximately 50% lighter than that of a standard AR-15 trigger, providing
a great combination of speed & accuracy
-Adjustable from 2-3/4 lbs. to 4 lbs. without removing from lower
-Full power hammer spring ensures proper ignition of primer
-Very short pull & reset allows for rapid follow up shots & greater accuracy
-Sturdy trigger assembly designed for rugged, trouble-free use
-Made of lightweight aircraft-grade aluminum & hardened steel
-Unique design of disconnect allows full 1/4" width, eliminating possibility of wear & double-firing
-High performance trigger & hammer needle bearings for smoother & faster firing

Other Features: Fully adjustable 2.75-4# pull, aerospace grade sealed roller bearings on hammer & trigger rotation points.Made in usa lifetime guarantee, 100% drop-safe design, skeletonized trigger

Elftmann trigger ar-15 pro component strait 3.5lb pull

FEATURES:
3.5 lb pull weight
Proprietary Threaded mounting system
Compatible with all calibers - 5.56, 9mm, .308 etc.
Fits any mil-spec AR-15 (Standard pin size, no large pin Colt)
Drop-Safe
Full power hammer spring

Other Features: 3.5lb pull, proprietary threaded mounting system, drop safe, fits any mil-spec ar-15, no large pin colt, full power hammer spring for proper igntn lifetime guarantee, 100% drop-safe design, skeletonized trigger, proprietary threaded mounting system

Rifle basix trigger ruger 77/22 14 oz to 2.5lbs black

FEATURES
-Replacement trigger for current Ruger bolt action rimfire 77/.22 & 77/.17
-Also fits .44 & .22 Hornet
-Right of left hand operation
-Weight of pull range: 14 oz. to 2.5 lbs.
-Comes complete with instructions, hardware pack, & wrenchfor easy user installation
-Black finish

Other Features: Black

Timney trigger ar-10 4lb pull solid small pin

FEATURES
-Self-contained
-Drop-in unit ready to install in an AR-10 rifle
-4 pound pull
-Lightweight alloy for superior durability
-If you have a POLYMER LOWER, we recommend putting a small thin piece of aluminum underneath the
trigger to protect the polymer lower.
-Available in standard curved, straight or skeletonized

Other Features: 4 lbs pull non adjustable solid trigger small pin model (.156" pin) will fit most ar-10 rifles

Timney safety low profile for swedish mauser m956lps black

FEATURES
-Low Profile Safety is for the 98 Mauser which cocks on closing of the bolt

Timney trigger ar-15 3lb pull solid straight small pin

FEATURES:
-Material Steel/Aluminum
-Will fit most AR-15 Rifles
3lbs pull
-Self contained unit
-Uses the same hammer and trigger pins

Other Features: 3 lbs pull non adjustable solid straight trigger small pin model (.156" pin) will fit most ar-15 rifles small pin fits almost all ar15 a few colt ar's use the large.176" pins all other ar-15's use the.156 trigger pins which is mil-spec

Cmc trigger ar15 9mm pcc single stage curved 3-3.5lb

FEATURES:
-Single stage match trigger
-Ultra-crisp trigger w/ no feel of creep prior to hammer release
-Comes w/ CMC Anti-Walk Pin Set
-Fits MIL-SPEC AR-15 & AR-10 style rifles

Other Features: 3-3.5 lbs pull non-adjustable, curved trigger for 9mm pcc's, small pin model (.156" pin) will fit most ar-15 rifles,

Rifle basix trigger rem.700 8oz.To 1.5lbs w/safety black

FEATURES
-Black
-Remington trigger including safety & bolt stop release
-Weight of pull range of 8 oz. to 1.5 lbs.
-All Remington triggers will fit models: 700, 40x, 721, & XR-100
-Factory adjusted to break at 10 to 12 oz.
-For right hand action only
-Comes complete with instructional DVD & hardware pack for easy user installation
*Replacing the X Mark trigger requires purchase of our "K" kit

Other Features: Includes safety and bolt stop black trigger

Cmc trigger anti-walk pin set ar-15 large pins

FEATURES:
-Self-contained & easy-to-install AR-15 trigger groups
-Anti-walk pins
-Steel
-Large pins

Elftmann trigger savage 110 adjustable 2oz-64oz black shoe

FEATURES:
100% Drop Safe
Zero Creep/Take-up
Easily Adjustable From less than 1.25lbs to over 4lbs
Proprietary Sealed Bearings
Precision Ground Shaft
Zero play in components
Adjustable Alum Trigger Shoe Availabe Red or Black
Both Curved and Straight Trigger Shoe Included

Other Features: Fully adjustable 2 oz to 64 oz , 6 to 1 ratio roller bearing pivot arm, savage 110, item comes with strait and curved shoe, made in the usa lifetime guarantee, 100% drop-safe design, zero creep, take-up, sealed bearings

Rifle basix trigger ruger m77 mkii target 8oz.-3lbs silver

FEATURES
-Replaces 2 Stage trigger for M77 MK II Varmint/Target Rifles
-Accommodates three position factory safety for excellent single stage operation
-Electroless nickel plated to match factory action
-Weight of pull range: 12 oz. to3 lbs.
-Comes complete with instructions, hardware pack, & adjustment screw for easy user installation
-Silver finish

Other Features: Replaces 2 stage trigger in ruger mkii varmint/target guns nickle plated to match action 8 oz-3lbs silver

Rifle basix trigger rem.700 8oz.To 1.5lbs w/safety silver

FEATURES
-Silver
-Remington trigger including safety & bolt stop release
-Weight of pull range of 8 oz. to 1.5 lbs.
-All Remington triggers will fit models: 700, 40x, 721, & XR-100
-Factory adjusted to break at 10 to 12 oz.
-For right hand action only
-Comes complete with instructional DVD & hardware pack for easy user installation
*Replacing the X Mark trigger requires purchase of our "K" kit

Other Features: Includes safety and bolt stop silver trigger

Elftmann trigger ar-15 pro component curved 3.5lb pull

FEATURES:
3.5 lb pull weight
Curved
Proprietary Threaded mounting system
Compatible with all calibers - 5.56, 9mm, .308 etc.
Fits any mil-spec AR-15 (Standard pin size, no large pin Colt)
Drop-Safe
Full power hammer spring

Other Features: 3.5lb pull, proprietary threaded mounting system, drop safe, fits any mil-spec ar-15, no large pin colt, full power hammer spring for proper igntn lifetime guarantee, 100% drop-safe design, skeletonized trigger, proprietary threaded mounting system

Elftmann trigger ar-15 match pro strait fngr adj 2.75-4lbs.
Other Features: Fully adjustable 2.75-4# pull, aerospace grade sealed roller bearings on hammer & trigger rotation points.Made in usa lifetime guarantee, 100% drop-safe design, skeletonized trigger, proprietary threaded mounting system

Hiperfire trigger ar-15/10 hpt eclipse w/nib plating low pull

FEATURES:
-HIPERFIRE®'s Top-of-the-Line AR Trigger
-Cam-Over Toggle Engine™
-Straight Trigger Bow
-HIPERSHOE® Finger Pad Revolution™

Other Features: State of the art trigger feature upgrades for the msr, low pull weights, pre-travel, trigger bow shape, bow furniture, nib plating hipertouch series, made in usa , veteran operated

Elftmann trigger ar-9 curved finger adj 2.75-4lbs.Mil-spec
Other Features: Fully adjustable 2.75-4# pull, specifically developed for 9mm and.45pcc platforms, u- shpaed captured disconnector for positive hold, made in usa lifetime guarantee, 100% drop-safe design, skeletonized trigger, 50% lighter than standard ar platform trigger

Wilson trigger ar tactical kit nickel teflon single stage
Other Features: Nickel teflon plating for ultra smooth trigger operation enhanced chrome silicon spring mil-spec measured at 5-3/4 lbs

Timney trigger remington 788 w/safety 1.5-4lb adjustable
Other Features: Includes safety blued version 1.5-3.5 lb adjustable

Timney trigger remington 700 the hit rh black curved 2lb

FEATURES:

Finish	Black
Material	Steel w / Aluminum Housing
Firearm Fit	Remington 700
Style	Curved
Draw Weight	8 oz
Hand	Right

Other Features: Curved shoe, 8oz-2lb trigger pull, designed for the long range rem 700 shooter, black

Elftmann trigger remington 700 adjustable 2oz-64oz w/s knob

FEATURES:
-100% Drop Safe
-Zero Creep/Take-up
-Externally Adjustable from less than 2oz to over 5 lbs
-Proprietary Sealed Bearings
-Over Sized Safety Knob

Other Features: Fully adjustable 2 oz to 64 oz , 6 to 1 ratio roller bearing pivot arm, for remington 700 & clone rifles made in usa, curved shoe lifetime guarantee, 100% drop-safe design, zero creep, take-up, sealed bearings, oversized safety knob, adj alum trigger shoe

Battle arms ar15 tt15 trigger adj 2-5lb 2 stage straight

FEATURES:
-Repeatable User Adjustable trigger pull
-Frictionless Release Technology
-Straight Trigger Lever

Other Features: B.A.D.Edition triggertech short two-stage trigger adjustable from 2lbs-5lbs frictionless release technology.Straight trigger

Rifle basix spring bg a-bolt factory trigger 1.25-3.5 lbs

FEATURES
-Replacement spring for Browning A-Bolt
-Wide range pull tension 1.25 lbs. to 3.5 lbs.
-Comes complete with instructionsfor easy user installation
-Black finish

Other Features: Light spring for brning a bolt only solution for the a-bolt replaces spring in factory trigger to lighten pull easy to install

Hiperfire trigger ar-15/10 hpt genesis 2.5-3.5lb pull

FEATURES:
-Cam-Over Toggle Engine™
-Curved Trigger w/ a Backbone™
-Very Short Over-Travel

Other Features: State of the art trigger feature upgrades for the msr, low pull weights, pre-travel, trigger bow shape, bow furniture, nib plating hipertouch series, made in usa , veteran operated

Cmc trigger ar15 9mm pcc single stage flat 3-3.5lb

FEATURES:
-Single stage match trigger
-Ultra-crisp trigger w/ no feel of creep prior to hammer release
-Comes w/ CMC Anti-Walk Pin Set
-Fits MIL-SPEC AR-15 & AR-10 style rifles

Other Features: 3-3.5 lbs pull non-adjustable, flat trigger for 9mm pcc's, small pin model (.156" pin) will fit most ar-15 rifles,

Timney trigger cz 455 3lb pre- set/ adjusts from 1.5-4lbs

FEATURES:
-Trigger allows you to become more accurate w/ your rifle
-No gunsmith needed, easy to install
-Adjustable for fine precision
-Ready for the range, right out of the box

Other Features: 3lb pull pre-set, adjusts from 1.5lbs to 4lbs

Wilson trigger competition match for 1911 silver

Features:
-Wilson three-hole serrated aluminum pad
-Matte silver finish on pad
-Blued steel bow
-Over-travel adjustment screw
-No fitting required
-Pad Length: .500"
-Pad Height: .905"

Package Includes:
-Trigger
-6-32 x 5/16" Set Screw
-1/16" Allen Wrench