Stocks And Forearms

Troy stock socc 5.56 blk airborne stock black

FEATURES:
-For AR-15
-Fits standard mil-spec M4 buffer tubes
-Adds reinforcement and strength to M4 buffer tube
-Multiple QD attachment points
-Shorter than a typical stock when collapsed
-Can be installed by rapid deployment or four-position capability
-Color: black
-Length: 14" (when extended)

Other Features: Fits standard mil-spec m4 buffer tubes

Ab arms modular rifle system modx g3 rem 700 sa black

FEATURES
-Drop-in chassis for the Remington® Model 700 Short Action, Right Hand
-Includes the aluminum chassis receiver, 11.5" hand guard & 0 MOA scope mount rail

Phase 5 stock ums universal mini stock for ar-15 blue

FEATURES:
-A fixed stock solution for your rilfle that fits a variety of buffer tubes & receiver extensions
-The UMS offers a smaller footprint & bottom curve which makes for a far superior anchor of the stock on the
chest
-This allows an operator to get in & out of position w/ greater of ease

Other Features: Fits most ar-15 buffer tubes utilizing two heavy duty set screws

Thril stock combat competition mil-spec tube black
Other Features: Fits mil-spec buffer tubes, dual ambidextrous free rotating qd sling mounts (qd swivel not included), removable rubber buttpad

Magpul stock moe ar15 carbine commercial tube black

FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" ExtendedRubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG400

Other Features: Fits commercial buffer tubes

Adaptive tactical ex lighted forend mberg 500 12ga black

FEATURES:
-Adaptive Tactical EX Performance Tactical Light and Forend
-Black
-Mossberg 500 & 88
-12 Gauge
-300-Lumen Beam

Other Features: 280 lumen tactical flashlight, 3 hour run time, uses 2 aa batteries, 3 settings momentary on, constant on, rapid strobe polycarbonate housing, quick detach light attaches to 2" piacatinny rail.

Mb stock flex standard 13.5" lop med.Pad mo-bu infin

FEATURES:
-Mossy Oak Break-Up Infinity
-Standard synthetic stock
-Medium (13.5" length of pull)
-Standard recoil pad
-Fits 12 & 20 gauge FLEX System shotguns, & MVP FLEX & FLEX-22 rifles

J&e ar15/ar10 milspec 6-pos rec extension buffer tube blk
Other Features: Anodized

Rival arms rifle stock ruger 10/22 chassis system black
Other Features: Fits ruger 10/22 barreled actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory/aftermarket bbls 1" max diameter m-lok compatible rail system, scalloped forend for a positive grip, tapped for sling swivel stud, designed for ruger factory magazines

F.A.B.Defense rapid adjustmnt precision stock odgrn ar pltfm

FEATURES:
Weight: 21.86 oz
Width: 1.65
Height: 5.98"
Length: 10.9"
Integrated Cheek Rest & adjustable Length Of Pull
1Latch system, locks both LOP and Cheek Rest height with one lever
1Latch system, can be configured for right or left-hand shooters
Heavy duty, rubber butt-pad with height adjustment

Other Features: Rapid adjustment precision stock

Adv.Tech.Buttstock w/pistol grip most pumps black syn

FEATURES
-Shotforce Pistol Grip Style Shotgun Stock
-Slim Ergonomic Design
-Length of Pull: 14"
-Non-Slip Pistol Grip Texture
-Increased Control &Accuracy
-X Series Reducing Butt-Pad
-Reduces Fatigue When Shooting Slugs and Turkey Loads
-Easy Installation
-Includes Adapters for All Supported Models
-Uses Factory Stock Bolt
-Swivel Stud Sling Attachment
-Scratchproof & Weatherproof
-DuPont^® Extreme Temperature Glass Reinforced Polymer
-Made in the USA

Fits:
-Most Maverick 88, Mossberg 500/535/590/835, Remington 870, & Winchester 1200/1300 12 GA shotguns

Other Features: Fits: 12ga.Mossberg 500/590, remington 870, norinco 98, winchester 1200/1300 includes adapters

Ergo grip stock adapter tact.Mossberg 500/590

FEATURES
-For Mossberg 500
-Use any styleAR type collapsible buttstock & pistol grip combination
-This stock adapter has the proper drop designed in, so factory sights can be used
(Bead, Rifle, & Ghost Ring Sights)
-Made from glass filled polymer
-Includes mounting hardware

Other Features: Allows ar-15 stocks and pistol grips to be installed on the mossberg 500 shotgun, does not include ar-15 buffer tube/buttstock or pistol grip

Magpul stock moe sl ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348

Other Features: Fits mil-spec buffer tubes

Magpul stock moe sl-k ar15 carbine mil-spec tube black

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.

Other Features: Fits mil-spec buffer tubes, compact buttstock

Iver johnson stock 2-pc pistol grip pump&auto 12&20ga black
Other Features: Fits all iver johnson pump & semiauto shotguns in 12 and 20 gauges.

Magpul stock ubr gen2 ar15 carbine black

FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)

*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.

**Specifications based on factory configuration

Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.

Rival arms rifle stock rem 700 sa chassis system black andzd
Other Features: M-lok compatible, scalloped forened for a positive grip, designed for use with aics style magazines, tapped for sling swivel stud rits remington 700 barreled short actions, allows use of ar-15 buffer tube, stock and pistol grip, fits factory and aftermarket bbls 1.375in max

Magpul stock moe sl-k ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Compact rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-1.25” Footman’s Loop for sling mounting, & also accepts the M-LOK QD Sling Mount for push-button
sling attachment (sold separately)

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. The MOE SL-K will only fit the common mil-spec tube.

Other Features: Fits mil-spec buffer tubes, compact buttstock

Odin stock zulu 2.0 w/padded buffer tube blue for ar-15

FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate

Mb stock flex compact-youth 12.5" lop medium pad black syn

FEATURES:
-Black
-Standard synthetic stock
-Compact (12.5" length of pull)
-Standard recoil pad
-Fits 12 & 20 gauge FLEX System shotguns, & MVP FLEX & FLEX-22 rifles

Magpul forend moe m-lok rem 870 12ga black

FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

Note: Not compatible with the Remington 870 Super Mag.

Magpul stock moe ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401

Other Features: Fits mil-spec buffer tubes

Adv.Tech.Ruger mini-14/30 strikeforce stock w/recoil sys

FEATURES
-Black
-TactLite 6-position adjustable stock
-Side-folds to the left of the receiver
-Can be fired from folded position
-TracLOCK System
-Dual sided QD attachment point
-Removable/adjustable cheekrest system
-X series thin recoil pad
-X1 style pistol grip
-4 forward Picatinny rail locations
-One 7" Picatinny toprail
-Two 2" Picatinny rails
-One 2" swivel stud Picatinny rail
-Blank covers for unused rail locations
-Additional ventilation in forend & top cover
-Slot for tactical sling attachment
-2 sling swivel studs
-All mounting hardware included
-DuPont® extreme temperature glass reinforced polymer

Fits:
-All Ruger Mini-14 Rifles with a Serial # 181 & above
-All Ruger Mini Thirty Rifles (Must remove small amount of material around the mag-well)

Other Features: 6 position collapsible and side folding stock scorpion recoil system scorpion razorback recoil pad scorpion recoil pistol grip 1- 7" picatinny top rail 2- 2" picatinny rails 1- 2" picatinny w/ swivel stud removable/adjustable cheekrest

Guntec airlite alum stock set minimalist design fde

FEATURES:
-Spiral buffer tube
-Aluminum tube & endplate
-Extremely lightweight
-Recoil pad
-Complete w/ buffer tube, end plate, ambi 1 point sling plate, hd castle nut, CAR 3oz buffer & chrome silicon
buffer spring

Other Features: New minimalist design complete w/spiral buffer tube ambi 1 point sling plate castle nut, buffer & spring

Guntec multi cal collapsible stock set w/adj cheek riser

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Adjustable cheek riser w/ 6 different heights
-Cheek riser has multi point locking system
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad

Magpul stock moe fixed ar15 carbine mil-spec tube black

FEATURES:
-Fixed Length
-Integrated 1.25" sling loops
-Durable polymer construction
-Mil-Spec
-Weight: 9.5 oz
-Black

Other Features: Fits mil-spec buffer tubes, fixed model

Bcm stock mod 0 black fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Black
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Bcm stock mod 0 fde fits ar-15 mil-spec

FEATURES
-Stock Assembly
-Mod 0
-AR-15
-Flat Dark Earth
-New patent pending latch reinvents the stock's interface with a mil-spec receiver extension, providing the user with superior strength when dropped or when mortaring malfunction clearance drill.
-Snag free Design. No sharp edges prevent tangling of the rifle with the shooter's sling, molle gear, or other kit.
-Modular VBOST (Vehicle Borne Operations Sling Tab)- This tab interfaces with the shooter's riggers' band or bungee to secure the shooter's sling against the stock when the carbine is not in use. Increasingly, this is the most common application when operating inside a vehicle.
-2 different types of ambidextrous sling mounting options, including QD swivel sockets
-Integrated color matched rubber butt pad for secure shoulder placement, along with increased durability
-Simple modular design. 5 parts, and 1 screw allow for modular adaption of future stock options and configurations.

Magpul forend moe m-lok rem 870 12ga fde

FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included

Note: Not compatible with the Remington 870 Super Mag.

Magpul stock moe sl ar15 carbine mil-spec tube fde

FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop

Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348

Other Features: Fits mil-spec buffer tubes

Pro mag archangel rifle stock for mosin-nagant 91-30

FEATURES
-Black
-Easy to install
-Designed for comfort, control & superior weapon retention
-Constructed of high-strength carbon fiber filled polymer
-Ambidextrous gooseneck-style stock with palm swell
-Click-adjustable cheek-riser/length-of-pull
-Front & rear quick detach style flush cups
-Secure grip storage compartment
-Fits Finnish M39 models with some modification
-Pre-inletted for a Timney Trigger
-Includes 10 round detachable magazine
-Soft rubber recoil pad - contoured & textured for superior comfort
-Fits most M1891 rifles, hex/round receivers on 91/30, Soviet M-38/M-44, Chinese T-53 carbines

Other Features: Includes 1-5 round magazine

Guntec multi cal collapsible stock set black

FEATURES:
-High Density Polymer
-Multiple Cutouts to Reduce Weight
-5.56 Caliber
-Neoprene Rubber Buttpad
-Accepts QD Sling swivel on left or right side
-QD Swivel
-Complete w/ buffer tube, end plate, Castle nut, CAR buffer & Chrome recoil spring

Other Features: New minimalist design complete w/buffer tube ambi 1 point sling plate castle nut, buffer & spring neoprene rubber buttpad