Tools

Truglo ar-15 sight tool 4/5 prong

Wicked tree gear replacement blade hand saw 7" wood!

FEATURES
-Replacement blade for Wicked Tough Hand Saw
-7" Blade
-Sharp Impulse hardened high carbon steel

Other Features: Sharp impulse hardened high carbon steel,7" blade

Warne universal scope level for 1" tubes

FEATURES:

Finish	Black
Material	Aluminum
Tube Diameter	1"
Hand	Ambidextrous
Weight	0.09 oz

Other Features: Scope level for 1" scopes

Angstadt bolt carrier group 5.56 ar-15 black nitride

Real avid master fit extended & standard castle nut wrench
Other Features: Torq wrench

Je ar15 polymer vice block upper receiver black

FEATURES:
-Safe clamping
-Solvent resistant
-AR-M16 platform
-Heavy duty Polymer constructed

Magpul armorers wrench ar15/m4 multi-function

FEATURES:
-American-made with US steel
-Heat-treated steel construction with manganese phosphate finish
-USGI barrel nut wrench
-Free-float tube barrel nut wrench
-1/2" torque wrench/breaker bar interface
-Armorer's hammer
-Rifle-length/Entry-length receiver extension wrench
-USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
-3/4" wrench for most flash hiders/muzzle brakes
-USGI torque spec references
-Bottle opener

*Note: Not compatible with larger pistol-style receiver extension tubes

Other Features: Made in usa, for mil-spec and pin style barrel nuts, fits standard flash hiders, removes rifle rec.Extentions, carbine castle nuts, works with 1/2 torque wrench (not included)

Grace usa screwdriver set micro set of6

Features:
-6-Piece Micro Screwdriver Set
-Each screwdriver is constructed of USA chromium-vanadium steel alloy blades
-Black oxide finish
-Handles are composed of turned Maine hardwood, topped off with a nickel-plated steel ferule
-100% Made in the USA

Set Includes:
-3 Micro Phillips (#00, #000, #0000)
-3 Matching Slotted Tips (3/32", 5/64", 1/16")

Other Features: Made in the usa micro phillips #00,#000,#0000 micro slotted 3/32, 5/64, 1/16

Roll pin wizard bolt catch roll pin tool for ar-15
Other Features: Easily installs and removes bolt catch roll pin, eliminates scratching without the need for a starter punch two in one tool also installs pivot pin and spring gen ii longer than original sits closer to receiver roll pin removal easier

Real avid pivot pin tool

FEATURES:
-Simplifies the Pivot Pin Installation Process
-Works w/ any AR15
-Non-marring Components

Truglo glock mag-wrench disassembly tool glock 42/43

FEATURES:
-Removes GLOCK® factory magazines
-Easily change base plates & replace springs
-Compatible w/ GLOCK® 42/43 single stack magazines w/ factory finger extension
-Made from machined aircraft aluminum

Other Features: Removes glock factory magazines, easily change base plates and replace springs, compatible with glock 42/43 single stack magazines with factory finger extension, made from machined aircraft aluminum, also works with double stack mags

Wheeler universal barrel clamp

FEATURES
-Precision extruded from aircraft grade aluminum
-Bonded with non-marring urethane
-The urethane provides a protective layer for the barrel's finish while providing extraordinary gripping abilities
-Three different barrel openings: .85", .66", .53"
-Will accommodate anything from an AR pencil barrel up to a bull barrel

Real avid master fit 1-1/8" free float barrel nut wrench
Other Features: Torq wrench

Hiviz glock sight tool

FEATURES
-3/16" hex driver tool
-Used for the installation of HiViz front Glock, Walther P99, and S&W SW99sights

Real avid accu-punch hammer and punches 10 pin punches

FEATURES:
-10 Steel pin punches w/ rubber rings for grip
-Pin alignment tool
-Balanced, ergonomic hammer w/ interchangeable hammer heads
-4 interchangeable hammer heads
-Kickstand tool case w/ peg board holes

Other Features: 10 steel pin punches w/ rubber rings for grip pin alignment tool 4-interchangeable hammer heads kickstand tool case

Real avid smart lock bore guide & pivot lock tool

FEATURES:
-Solvent application slot
-Chemical resistant, non-marring industrial resin construction
-Upper pivot lock arm
-Protects chamber & bore throat from damage while cleaning
-Keeps AR15 upper locked open at optimum angle for bore cleaning
-Restricts solvent leakage & keeps gunk out of the action
-Perfectly aligns cleaning rod & cleaning tips w/ barrel

Other Features: Ar15 pivot lock to hold upper open during cleaning pivot lock tool securely holds upper open while cleaning star chamber

Grace usa roll pin punch set steel 12pc w/vinyl pouch

FEATURES:
-High Carbon Molbendenum Tool Steel
-Has a reverse taper from tip of punch to help prevent punch from sticking in the work piece
-Manufactured from hex stock vs. round which helps stabilize punch from rolling away from user

Other Features: Made in the usa

Grovtec sling swivel stud installation tool.

FEATURES
-Sling Stud Installation Tool
-Constructed of heat-treated carbon steel
-Will not damage stock finish
-Hex base designed to fit any standard drill chuck or 1/4" nut driver

Mi upper receiver rod tool for ar15 builds
Other Features: Ultimate tool for barrel nut installs or removal, excellent for removing seized barrel nuts without damaging upper designed for muzzle device installs and will not damage index pin, works with standard m4/m16 barrel extensions

Michaels step drill set for mounting swivel studs in wood

FEATURES:
-Special blade cuts cleanly without drawing down or splintering wood
-Step shoulder countersinks to correct depth in one operation
-One drill for forend, one for rear

Odin crowfoot 1-1/4" for.223 5.56 nato ar style barrel nuts

FEATURES
-1/2" drive 1 1/4" jumbo crowfoot wrench for your ODIN Works .223/5.56 Forend installation
-Use to torque the barrel nut to 40-50 ft. lbs.
-NOT compatible with the ODIN Works.308 KeyMod Forend barrel nut

Real avid master fit delta ring barrel nut wrench
Other Features: Torq wrench

Wheeler handgun sight tool universal armorers model

FEATURES:
-Precision machined unit
-Designed in install, un-install, or adjust front & rear dovetail sights
-Fully captures & supports slide so it won't deform
-Works on all semi auto pistols
-Large 4 post drive knob to easily push the sight
-Reference marks for precise adjustments

Grace usa gun care tool kit set of 17 tools

17-Piece Gun Care Tool Set Includes:
-8-Piece Original Gun Care Screwdriver Set
-8-Piece Brass Pin Punch Set
-Sizes 1/16", 3/32", 1/8", 5/32", 3/16", 7/32", 1/4", 5/16"
-8 oz. Brass Hammer
-Compact zipper case (12" x 9" x 1.5") made from durable, soft Nufak

Other Features: Made in the usa, includes 8 pc gunsmith screwdriver set, 8 pc brass pin punches, 8oz brass hammer, & vinyl case

Grace usa glock punch 3/32" punch w/wood handle

FEATURES
-Grace USA 3/32"pin punch with J Series wood handle
-Perfect palm fit punch for Glocks & other firearms that require a 3/32" pin punch
-Made in the USA

Other Features: Made in the usa

Real avid smart drive 90 pce gunsmithing kit w/ force ast

FEATURES:
-The main driver features a magnetic bit holder, rubber grip, jeweler's spin top & 360° LED light
-It partners w/ the small "close quarters" driver to create Force Assist™
-Force Assist is a proprietary system that helps users to loosen frozen-in-place screws as well as precisely
tighten screws

Other Features: 87 standard & metric blk oxide coated bits large driver w/ led light small driver scope turret tool magnetic parts tray hard case

Wheeler complete scope mounting kit 1" and 30mm

Features:
-Mounts any scope 1" or 30mm

Complete List of Components:
-F.A.T. Wrench® torque screwdriver
-10 gunsmithing screwdriver bits
-Level-Level-Level
-1" scope ring lapping bar
-30mm scope ring lapping bar
-1" scope ring alignment bars
-30mm scope ring alignment bars
-Lapping bar handle
-Lapping compound
-Thread lock

Other Features: Includes: instructional dvd f.A.T.Wrench torque screwdrvr 10 gunsmithing screwdrvr bits 1" & 30mm ring lapping bars 1" & 30mm alignment bars lapping bar handle lapping compound thread lock level-level-level includes plastic storage case

Real avid 2-in-1 tool for glock disasembly & front sight

FEATURES:
Easily remove pins to disassemble your Glock to clean, modify or maintain
Precision-knurled driver to easily install or remove stock and aftermarket front sight
3mm Armorer's pin punch fits all Glock pin sizes
O - rings keep the protective cap in place
3/16" magnetic hex nut driver fits stock and aftermarket front sight
Key ring
Flat Black cap allows firm pressure on sticky pins without discomfort to hand
Reversible dual function tool knurled for no-slip grip

Other Features: 3mm pin punch 3/16" hex nut driver

Odin crowfoot 1-3/16" for odin ragna barrel nuts

FEATURES:
-1/2" drive 1 3/16" jumbo crowfoot wrench for your ODIN Works Ragna Forend installation
-Use this crowfoot wrench to torque the barrel nut to 40-50 ft lbs.

Other Features: For odin ragna barrel nuts and any barrel nut that uses a 1-3/16" wrench

Real avid master fit ar15 crowfoot wrench set 13 pices
Other Features: Torq wrench w/ 12 wrenches delta ring, free float barrel extended & stand castle nut thin castle nut, 2" spanner 3 prong flash hider 5/8" muzzle/a2 buttstock ext 3/4" muzzle, 30mm free float 1-1/8" free float nut 1-1/4" free float bbl nut 1-5/16" free float bbl nut

Lyman mechanical trigger pull gauge 0-12 lbs

FEATURES:
Reads from 0 to 12 pounds
2-ounce increments
Highest weight indicator
Aluminum and steel construction
“T” handle and hanging loop for storage

Other Features: 2 ounce incremenys redas from zero to 12 pounds.Highest weight indicator.Aluminum and steel construction.T handle and hanging loop for storage.

Truglo pistol-tec armorer's block

FEATURES:
-Bright Green CREE™ LED
-300 lumen output
-Machined aircraft-grade aluminum
-Operates on included 18650 rechargeable battery
-Pressure switch included
-Includes scope mounting kit, AC/DC charger & carry case

Other Features: Pistol-tec armorer's block