Reloading Tools

Lee double cavity mold.457 ball w/handles

FEATURES
-Double Cavity Mold
-Produces a .457 diameter ball
-143.28 grains
-Includes handles

Lee full length 2-die set.223 wssm_

FEATURES
-Full length 2 die set for .223 Winchester Super Short Magnum
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 4-die set.380acp

FEATURES
-For .380 Auto
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee double cavity mold.225-55-rf w/handles

FEATURES
-Produces a gas checked .225 diameter 55 grain round
-Flat bullet
-Suitable for .22 caliber cartridges
-Handles included

Other Features: For gas checks

Lee quick change drum kit for auto-drum powder measure

Features:
-Can be used in conjunction with the Classic Powder Measure & the Auto Drum Powder Measure
-All drums are infinitely adjustable within range
-No tools are required for adjustment
-A graduated adjustment key is included with each drum
-Each turn of the adjusting screw is .1 cc or about 1 grain of powder
-Each key is marked with .01 cc graduations, allowing easy 1/10 grain powder adjustments

Includes 4 precision molded nylon drums:
(2) Small Drums for charging .25 ACP to .223 Remington
(2) Large Drums for charging the .223 Remington to Large Magnums
Also include an insert to allow reduced capacity charging similar to smaller drum

Other Features: Includes large & small drums

Lee double cavity mold.277-135-rf w/handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Other Features: For gas checks

Lee double cavity mold.535 ball w/handles

FEATURES
-Double Cavity Mold
-Produces a .535 diameter ball
-229.87 grains
-Includes handles

Lee six cavity mold 9mm 125gr-2r no handles

FEATURES
-Six Cavity Mold
-.356 Diameter
-125 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

Lee quick trim die body.45-70 government

FEATURES
-Quick trim die for .45-70 Government

Lee six cavity mold.225 55gr rf no handles

FEATURES
-Six Cavity Mold
-.225 Diameter
-55 grain
-Round nose bullet
-Suitable for cartridges like .22 caliber
-Lube & handles sold separately

Lee double cavity mold.562 ball w/handles

FEATURES
-Double Cavity Mold
-Produces a .562 diameter ball
-266.46 grains
-Hard anodized sprue plate
-Includes handles

Lee trimmer gauge.338 lapua magnum

FEATURES
-For .338 Lapua Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Lee double cavity mold.452-200-swc

FEATURES
-.452 diameter
-200 grain
-Semi Wad cutternose bullet
-Suitable for cartridges like.45 ACP, .45 Colt
-Handles included

Lee six cavity mold 9mm 124gr-2r no handles

FEATURES
-Six Cavity Mold
-.356 Diameter
-124 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

Lee double cavity mold.365-95-1r w/handles

FEATURES
-.365 diameter
-95 grain
-Roud nose bullet
-Suitable for cartridges like9mm Makarov
-Handles included

Lee large cutter & lock stud w/8-32 threaded cutter

FEATURES
-Large cutter with 8-32 thread shank
-For use on popular powered case preparation centers

Lee press shellholder r-3

FEATURES
-R-3 universal shell holder
-For.30-30, 6.5x55 Mauser, .32-40 & similar

Other Features: Fits rifles: 30 herrett; 22 savage; 30/30 win; 219 zipper; 32 win spec; 25/35 32 win s.L.6.5x55 mauser; 32/40 win;7x30 waters; 356 win; 7.5mm schmidt 375 win; 7.65x53 arg master 38/55 win

Lee full length 3-die set.30-30 winchester

FEATURES
-Pacesetter 3 die set for .30-30 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee full length 3-die set.308 winchester

FEATURES
-Pacesetter 3 die set for .308 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set 9mm luger

FEATURES
-For 9mm Luger
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.38 special

FEATURES
-For .38 Special Pistol
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.45acp

FEATURES
-For .45 ACP
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee carbide 3-die set.45 long colt

FEATURES
-For .45 Long Colt
-3-die set
-Carbide full length sizing die
-Bullet seating die
-Powder thru expanding die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee full length 2-die set.50bmg

FEATURES
-Full length 2 die set for .50 BMG
-1 1/4x12" thread
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data

Other Features: 1 1/4 -12 thread series dies

Lee press shellholder r-1

FEATURES
-R-1 universal shell holder
-For .38 Long & Short Colt, .38 Special, .357 Magnum & similar

Other Features: Fits: 22 rem jet; 256 win mag; 38 s&w; 38 colt n.P.; 38 short colt; 38 long colt; 38 special 357 magnum; 41 long colt

Lee press shellholder r-2

FEATURES
-R-2 universal shell holder
-For.25-06, 7mm-08, 8x57 Mauser, .45 ACP& similar

Lee press shellholder r-7

FEATURES
-R-7 universal shell holder
-For.30 M1, .32ACP& similar

Lee press shellholder r-11

FEATURES
-R-11 universal shell holder
-For .444 Marlin, .44 Special/Magnum, .45 Colt& similar

Lee press shellholder r-10

FEATURES
-R-10 universal shell holder
-For .220 Swift, 6.5 Jap, 7x64 Brenneke & similar

Lee press shellholder r-9

FEATURES
-R-9 universal shell holder
-For.41Magnum& similar

Lee press shellholder r-8

FEATURES
-R-8 universal shell holder
-For.33 Winchester, .348 Winchester, .40-65, .45-70& similar

Lee press shellholder r-5

FEATURES
-R-5 universal shell holder
-ForWinchester Short Magnums, 7mm Remington Magnum, .303 British, .480 Ruger& similar