Reloading Tools

Lee double cavity mold.451 ball w/handles

FEATURES
-Double Cavity Mold
-Produces a .451 diameter ball
-137.71 grains
-Includes handles

Lee full length 3-die set 7.65 argentine mauser

FEATURES
-Pacesetter 3 die set for 7.65 Argentine Mauser
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee trimmer gauge.300wsm

FEATURES
-For .300 Winchester Short Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Lee case collator

FEATURES
-Fits on top of the case feeder
-Makes filling the tubes faster on the Pro 1000 & Load-Master Presses
-Does not include case feed tubes

Rcbs fl die set.300 remington ultra mag.Gp-a

FEATURES
-Caliber: .300 Remington Ultra Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs rotary case trimmer pilot.25 caliber

FEATURES
-.25 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Hornady g3 1500 electronic scale

Mec wad finger 20ga

FEATURES
-20 Gauge
-Funnels the was through the crimp & into the wad chamber of the casing
-Fits all older MEC reloaders produced before 1983

Rcbs fl die set.22-250 gp-a

FEATURES
-Caliber: .22-250
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Rcbs deburring tool 17-60 cal

FEATURES
-.17-.60 caliber
-Allows the inside & outside chamfering & deburring of cases
-Made of hardened steel

Lee press shellholder r-21

FEATURES
-R-21 universal shell holder

Lee shell plate carrier #11

FEATURES
-Lee Pro Carrier #11 Complete
-Used to change calibers on the Pro 1000
-Includes carrier, shell plate, folding primer tray, case ejector, auto index, & spare parts

Other Features: Includes large primer feeder #11 shellplate, & carrier

Rcbs shell holder #17

FEATURES
-Shell Holder #17
-Built from hardened steel
-Designed to properly align the case with the reloading die in single-stage & turret presses
-Sized to fit specific case heads & capture 0.125" of the case head for proper SAAMI head spacing

Lee full length 3-die set.358 winchester

FEATURES
-Pacesetter 3 die set for .358 Winchester
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Lee trimmer gauge.38-55 winchester

FEATURES
-For .38-55 Winchester
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

Lee quick trim die body 7x57 mauser

FEATURES
-Quick trim die for 7x57 Mauser

Rcbs standard roll crimp die set.44-40 winchester gp-b

FEATURES
-Caliber: .44-40 Winchester
-The 3-Die Roll Crimp Set is for loading straight-wall cartridges
-Its steel Sizer Die sized the case & de-primes
-Note: Cases must be lubricated
-The Expander Die expands the case to the proper diameter to accept the bullet, & it imparts
case mouth flare/bell for bullet feeding
-The Seater Die seats the bullet & roll crimps

Lee full length 2-die set.25wssm

FEATURES
-Lee Pacesetter 2-Die Set
-25 Winchester Super Short Magnum (WSSM)
-Steel material
-Includes: Sizer Die and Bullet Seater Die with built in Roll Crimp
-Threads: 7/8"-14
-Accessories: Shellholder, Powder Dipper, Load Data Sheet, Plastic Container
-Adjustable crimp
-Built to last a lifetime and are great at producing factory like ammunition.

Frankford arsenal platinum brass dryer

FEATURES
-Specifically designed to dry brass after Rotary Tumbling or Ultrasonic cleaning
-Vented trays provide the best airflow to minimize drying time
-Top-mounted fan circulates up to 160°F air to quickly dry the brass inside & out
-5 removable trays easily dry up to 1,000 pieces of .223 brass in less than 1 hour
-Heavy Duty 500 watt unit

Other Features: Dries brass after ultrasonic cleaning or rotary tumbling, holds 1000.223 cases, or 2000 9mm cases.

Lee x-press shellholder #8
Other Features: X-press shell holder for app automatic processing press.Allows the case to pass through the shell holder after operations are performed.Fits 33 win, 348 win, 40-65, and 45-70.

Rcbs ar series die set w/taper crimp seater.300aac blackout

FEATURES
- Caliber: .300AAC Blackout
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Rcbs shell holder #25

Hornady shell holder #1

FEATURES:
-Shell holder #1
-Precision machined from solid steel then heat treated to perform flawlessly for the life of the press

Lee six cavity mold 9mm 124gr-2r no handles

FEATURES
-Six Cavity Mold
-.356 Diameter
-124 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

Mec loader auto indexing grabber 12ga 118

FEATURES
-12 gauge
-1 1/8 oz. charge bar
-Bushings: 29, 30, 32
-Works on six shells at once
-Fully automatic primer feed
-Auto-cycle charging
-Three-stage crimp
-"Power Ring" resizer
-Automatic indexing
-Finished-shell ejection
-Auto-Dex™ automatically moves the shells through each reloading stage by
simply returning the handle to the top of its stroke

Other Features: 29 30 32 bushings 1 1/8 oz.Bar

Lee full length 3-die set 7.62x39 russian

FEATURES
-Pacesetter 3 die set for 7.62x39 Russian
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

Rcbs ar series die set w/taper crimp seater.223 remington

FEATURES
- Caliber: .223 Remington/5.56mm
- Feature a Small Base Sizer Die designed for semi-automatic firearms, and a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons
- 2 dies/set

Rcbs fl die set.257 wby.Mag.Gp-a

FEATURES
-Caliber: .257 Weatherby Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

Lee collet 2-die set.30-06 springfield

FEATURES
-.30-06 Springfield
-2 piece Collet die set
-Collet die that uses a collet to squuze a mandrel
-Dead length bullet seater die
-Shell holder
-Powder dipper
-Loading data

Rcbs rotary case trimmer pilot.44 caliber

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

Egw ammo chamber checker 9mm 50 hole

FEATURES
-Uses the actual Clymer reamers that are used to chamber barrels
-Anodized matte black for durability
-Measures min case diameter
-Measures max overall length

Other Features: Aircraft aluminum,made in usa, anodized matte black

Lee double cavity mold.277-135-rf w/handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Other Features: For gas checks