RCBS

FEATURES
-Designed for collet-style rods for large primer cartridges, as well as for current
competition-style dies/rods, 7 TCU and 35 Whelen

FEATURES
-.30 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.32 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.35 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.40 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.44 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.45 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-.500 caliber
-Tapered to guide pilot into the case mouth
-Prevents case from wobbling when being trimmed to length
-For use with RCBS® Trim Pro® Case Trimmers, Rotary Case Trimmer-2 & Rotary Case Trimmer
-For use with RCBS Case Trimmers only

FEATURES
-Caliber: .25 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

FEATURES
-Caliber: .30 Caliber/7.35mm
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

FEATURES
-Caliber: .44 Cal/11MM
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

FEATURES
-Caliber: .20 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

FEATURES
-Designed to easily pull jacketed bullets without damaging them
-Utilizes the standard 7/8-inch-14 thread
-May be used in any single-stage reloading press with this thread
**Not for use with rimfire cartridges

FEATURES
-Caliber: .500 Cal
-This collet is designed to be used with the RCBS® Standard Bullet puller to remove bullets from a wide
range of cases

FEATURES
-Designed to fit most standard rifle or pistol cases, including the WSM, WSSM & Ultra Mag
families of cartridges
-Two-side design offers three different case fits per side
-50-case capacity

FEATURES
-Fast, accurate & highly sensitive due to a unique single-stage lever system
-Primers feed through the auto primer feed tube one by one, preventing potential
contamination by oily fingers
-2 primer rod assemblies & 2 primer feed tubes are included

FEATURES
-Handles today's larger primer package quantities
-The square shape makes it easier to handle
-A grooved tray surface quickly positions primers anvil-side up

FEATURES
-Redesigned to fit a larger group of cases
-Swaging rods are made from stronger, high-tensile steel
-Not for use on progressive presses

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts for large & small primer pockets
-Includes no-roll accessory handle

FEATURES
-Removes residue in primer pockets with a couple of twists
-Stainless bristles & interchangeable mounts

FEATURES
-Drops primers one at a time into the primer plug & sleeve
-Helps stop misfires, as greasy fingers never need to touch primers, & the nylon primer
pick-upkeeps primers from falling out
-Has a tube capacity of 100 primers
-Fits the Rock Chucker® II and Reloader Special Presses

Note: Not for use with RC Supreme

FEATURES:
-Stops misfires as greasy fingers never need to touch primers
-100 primer capacity
-Large primer only tube

FEATURES:
-Stops misfires as greasy fingers never need to touch primers
-100 primer capacity
-Small primer only tube

FEATURES
-For pre-1990s collet-style rods designed for small-primers cartridges, as well as for
current competition-style dies/rods, X Die® mandrels, PPC and .357 Sig

FEATURES:
-A must for progressive reloaders
-Features a Small Base Sizer Die designed for semi-automatic firearms, & a Taper Crimp Seater Die
-The Small Base Sizer guarantees the cartridge will rechamber in AR-platform weapons

FEATURES
-Caliber: .25-06
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-For bottleneck cases to be fired in bolt-action rifles only-specifically, cases fired out of a specific rifle &
neck-sized to go back into the same rifle
-The set consists of a Neck Sizer Die w/ an Expander-Decapping Unit, & a Seater Die w/ Bullet Seater Plug
-The Neck Sizer Die resizes the neck only & de-primes
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time it's seated
-.243 Remington

FEATURES
-Caliber: .243 Winchester
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES
-Caliber: .257 Weatherby Magnum
-This two-die set is intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die
with an Expander-Decapping Unit, & a Seater Die with Bullet Seater Plug.
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The die vents to prevent case damage caused by trapped air & for excessive lubricant
-Headspace is held to minimum tolerances to avoid changing the case body length during full length sizing
-Then included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated

FEATURES:
-Intended for reloading bottleneck cases, & consists of a Full-Length Sizer Die w/ an Expander-Decapping
Unit, & a Seater Die w/ Bullet Seater Plug
-The Full-Length Sizer Die brings the case to SAAMI minimum cartridge dimensions
-It sizes the outside of the case, de-primes & expands the neck to accept the bullet
-The included Seater Die has a built-in roll crimper to secure the bullet at the same time as it's seated