Odin Works
![]()
FEATURES:
-Made from 6061 aluminum & Limbsaver recoil pad
-Secondary Buffer System
-Reduces Recoil
-Weight: 1.23 lbs
-Includes: ZULU Adjustable Stock - Padded Intermediate Buffer Tube - Ambi Sling/QD Plate
FEATURES:
-All DI barrels include stainless steel tunable gas block
-Caliber: 223 Wylde
-Length: 10.5"
-Twist: 1:8"
-Weight: 1.23 lbs
Other Features: Carbine length gas placement, includes tunable low profile gas block
FEATURES
-FDE anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
-Compatible with KNS Pins -NOT recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15 oz. (including button, paddle & screws)
-All parts included
-Easy drop-in installation
Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins
FEATURES
-Matte black anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
-Compatible with KNS Pins -NOT recommended for use with BAD lever
-Four times larger than factory magazine buttons
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.15 oz. (including button, paddle & screws)
-All parts included
-Easy drop-in installation
Other Features: Comes with screw and button,.78" wide by.94" long, works with kns pins
FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Silver
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
FEATURES:
-Compatible w/ BAD Lever & KNS Pins
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
-Black
Other Features: Billet aluminum, works with magpul bad lever and kns pins
FEATURES:
-Made from 6061 Aluminum
-Largest profile yet, making it easily accessible by all shapes & sizes of hands & fingers
-Works w/ both AR15 & AR10 lower receivers
-Release magazine w/out changing grip or position
-Contoured for positive depression & reduced slip
FEATURES
-Red anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
-Compatible with BAD lever - Will NOT work with anti-walk pins unless you modify the XMR2
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.1 oz. (including button, paddle & screws)
Other Features: Comes with screw and button,.585" wide by.75" long, works with magpul bad lever
FEATURES:
-Gun Metal Grey
-Compatible with BAD lever
-Will not work with anti-walk pins unless you modify the XMR2
-.1 oz. (including paddle, button, & screws)
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
Other Features: Comes with screw and button,.585" wide by.75" long, works with magpul bad lever
FEATURES
-FDE anodized finish
-Machined from billet 6061 aluminum
-Works with both AR15 & AR10 lower receivers
-Compatible with BAD lever - Will NOT work with anti-walk pins unless you modify the XMR2
-Large surface area for quick magazine reloads
-Easy to reach
-Ergonomic design
-Release magazine without changing grip or position
-Contoured for positive depression & reduced slip
-Weight: 0.1 oz. (including button, paddle & screws)
Other Features: Comes with screw and button,.585" wide by.75" long, works with magpul bad lever
FEATURES:
-Receiver end plate w/ ambidextrous sling attachment points & QD mount
-No castle nut required if used w/ our buffer tube
-Matte Black Type III hard anodize finish
FEATURES:
-Receiver end plate w/ ambidextrous sling attachment points & QD mount
-No castle nut required if used w/ our buffer tube
-Matte Black Type III hard anodize finish
FEATURES:
M-LOK to Arca
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES:
-Red
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
Other Features: Made from 7075 billet aluminum
FEATURES:
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
Other Features: Made from 7075 billet aluminum
FEATURES
-M-LOK B1 Handstop
-Designed to give you better control through a more ergonomic grip angle while not adding bulk to
the front of your rifle or pistol
-Low profile ergonomic fit
-Size: 2.38" x 1.15" x 0.90"
-Weight: 1.15 oz.
FEATURES:
-Designed to give you better control through a more ergonomic angle
-Configurable up to 8 different orientations featuring the 90 & 45 degree selector barrel
FEATURES:
-Made from 416R Stainless Steel
-5/8-24 Threading
-Knurled
FEATURES
-Fits AR-15/M4 compatible style rifles
-Mil-spec dimensions
-Bolt Carrier Group Material: Case hardened 8620
-Steel Finish: Black nitride
-Gas Key: 4130 steel attached with Grade 8 hardware & properly staked into a milled "valley" to
ensure proper positioning
-Cam Pin: Hardened 4340 cam pin
-Firing Pin: Mil-Spec firing pin made of 8740 steel, center-less ground & hard chrome coated
-Bolt Assembly: The bolt is "true" Mil-Spec dimension & external surfaces are CNC ground
-Bolt Material: Case hardened 9310 steel
-Finish: All bolt components black nitride
-Extractor: 4340 steel Mil-Spec
-Extractor spring &O-ring combination
-Magnetic Particle Inspected
-High Pressure Test
-Made in USA
FEATURES:
-Made from 416R Stainless Steel
-1/2-28 Threading
-Knurled
FEATURES:
-303 stainless steel
-Stainless steel tuning screws
-Fits 0.750" barrels
-Tunable gas block designed to perfectly tune your rifle
-Set it and forget it
-Included with all DI ODIN Works barrels
-Includes roll pin, set screws, and wrench
Other Features: Tunable gas block designed to perfectly tune your rifle
FEATURES:
-Includes cross pin and set screws
-Nitride finish
-Made from carbon steel
-Internal Diameter 0.7505-0.751
-Fits inside all ODIN Works Forends
FEATURES:
-For AR15 NO forward assist - slick side
-Low profile brass deflector
-9mm
Other Features: Slick side (no forward assist) w/low profile brass deflector, machined from 7075 billet aluminum,
FEATURES:
-For AR15 NO forward assist - slick side
-Low profile brass deflector
-Machined out of 7075 Billet Aluminum
-Dust cover included
Other Features: Slick side (no forward assist) dust cover included, machined from 7075 billet aluminum,
FEATURES
-Machined out of 7075 billet aluminum
-NO forward assist-slick side
-Low profile brass deflector
-Dust cover included
Other Features: Slick side (no forward assist) dust cover included, machined from 7075 billet aluminum,
FEATURES
-Black
-Made from 7075 billet aluminum
-Ergonomic design for easy gripping
-Upgrades any Mil-Spec charging handle
-Allows for faster & smoother operation of the charging handle
Other Features: Upgrades any mil-spec charging handle, made of billet almuminum,
FEATURES:
-31 piece set to complete a lower
-Machined parts, no MIM
-Hammer 8620 steel
-Trigger 8620 steel
-Disconnector 4340 steel
-Trigger Pin 4140 steel
-Bolt Catch 4340 Steel
-Polymer Pistol Grip
Other Features: 31 piece kit includes hammer, trigger, disconnector, trigger pin, bolt catch & polymer pistol grip
FEATURES:
M-LOK to Arca
M-LOK to Harris Bi-Pod
M-LOK to Picatinny
Lightweight design
6061-T6 aluminum
Black Hard Anodized
FEATURES:
-New mounting solution for Harris Style Bipods
-Used w/ the M-LOK modular mounting system
-Made from 6061 Aluminum
-Low Profile
-Black Matte Anodize
-Designed to maintain repeated grip position
-Includes M-LOK nuts, screws, & hex wrench
-It adjusts in 1/2 slot increments for precise accessory placement
-Red
Other Features: Allows harris bipods to mount to m-lok rails
FEATURES:
-New mounting solution for Harris Style Bipods
-Used w/ the KeyMod interlocking rail system
-Made from 6061 Aluminum
-Low Profile
-Universal KeyMod System
-Black Matte Anodize
-Designed to maintain repeated grip position
-Includes KeyMod nuts, screws, & hex wrench
-Red
Other Features: Allows harris bipods to mount to keymod rails