Magpul
![]()
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"
Other Features: Fits 1913 picatinny rails
FEATURES
-Size L5 (11 Slots)
-Max overall length of 4.9"
-Mounting screw center-to-center of 3.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L4 (9 Slots)
-Max overall length of 4.1"
-Mounting screw center-to-center of 2.4"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L3 (7 Slots)
-Max overall length of 3.3"
-Mounting screw center-to-center of 1.6"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Size L2 (5 Slots)
-Max overall length of 2.5"
-Mounting screw center-to-center of 1.2"
-For use with MOE hand guards & forends
-Allows the attachment of various 1913 Picatinny spec rail-mounted accessories
-Injection molded from a proprietary reinforced composite for enhanced strength & durability while
remaining lightweight
-Beveled ends reduce snagging & eliminate sharp corners & edges
-All hardware necessary for attachment directly to integral mounting slots on MOE hand guards &
forends is included
*Additional hardware may be necessary for other applications
Other Features: Fits magpul moe handguards only
FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels
Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).
*Specifications based on factory configuration
Other Features: Direct replacement for fixed a1 or a2 buttstock.
FEATURES
-Mounts to rifle-length receiver extension tube without A2 spacer (not included)
-Sloping cheek weld combines a slim profile with user comfort
-Overall shape provides for offhand hold options
-Rubber butt-pad provides positive shoulder purchase to prevent slippage
-Large storage compartment easily accessible behind hinged butt-plate
-Knockout bosses on the bottom allow for the addition of an optional accessory rail
-Sling Mounts
-Bottom Rear -1.25" sling loop
-Front/Rear -Optional Sling Mounts fit up to 1.5" push-button QD swivels
Note: The MOE Rifle Stock is a direct replacement for an A1 or A2 fixed stock. Fitting to a carbine with a collapsible stock will require a rifle-length receiver extension tube, rifle buffer & spring (not included).
*Specifications based on factory configuration
Other Features: Direct replacement for fixed a1 or a2 buttstock.
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" ExtendedRubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG400
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear/Bottom - 1.25" sling loops
-Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG401
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG379
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes lightweight model
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG370
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec receiver extension & may vary depending on tube manufacturer.
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Sloping cheek weld provides a wide contact surface for user comfort
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to three (3) CR123A lithium or two AA batteries
-Tubes are accessible from the rear via a tethered, hand-removable rubber plug
-Storage compartment in tail of stock with positive latching access foor on right hand side
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Mid-Included reversible Sling Mount Kit – TYPE 3 fits up to 1.5" push-button swivels (swivel not
included)
-Rear/Bottom - 1" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG371
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec size extension on your rifle, make sure to order #MAG347
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, LMT, Ruger, S&W, SIG, and others (please see the note below)
-Sloping cheek weld combines a slim profile with user comfort
-Dual-side release latch provides easy adjustment while remaining anti-snag
-Premium chrome-silicon lock spring provides positive locking & long service life
-Internal anti-rattle feature minimizes wobble on receiver extension tube
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Compatible with Magpul ASAP®, ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Integral push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec size extension on your rifle, make sure to order #MAG348
Other Features: Fits mil-spec buffer tubes
FEATURES:
-Provides a forward attachment point for the Magpul MS4 Sling & other push-button QD slings
-Made from corrosion resistant steel
-Mounts on 1913 Picatinny rail
-Places the attachment point at an angle optimized for comfortable two-point sling use while maintaining
easy push-button access
Other Features: Qd sling swivel not included, qd attachment point only.
FEATURES:
-Can be added to either side of the SGA®, MOE® Rifle, MOE® Fixed Carbine,MOE® AK, Zhukov-S,
Hunter 700, and Hunter X-22 Stocks for use with push-button QD Sling Swivels or our own Magpul® QDM
-Heavy-duty black phosphatized steel construction
-Easily installs with provided hardware
-Swivels not included
Other Features: Allows qd swivel (not incl.) to be attached to sga shotgun stocks and moe rifle stocks (not carbine), and moe fixed carbine stocks.
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such asBushmaster, DPMS, Olympic, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.55" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG310
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, and others (please see the note below)
-Supplemental friction lock minimizes accuracy robbing wobble
-Sloping cheek weld combines a slim profile with user comfort
-Shielded release latch prevents snagging & accidental operation
-Premium chrome-silicon lock spring provides positive locking & long service life
-Side mounting slots accept optional cheek risers for NON AR15/M4 applications
-Removable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD & other receiver-mount sling attachments
-Sling Mounts
-Rear -Push-button QD swivel sling mount accommodates up to 1.5" swivels (ambidextrous)
-Rear/Bottom - 1.25" sling loop
Toe - Lanyard hole for custom para-cord rigs
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG311
Other Features: Fits mil-spec buffer tubes
FEATURES
-25 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC, Colt LE901-16S,
CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les
Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington R-25, Ruger SR
762, S&W M&P10, SIG716, & others*
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring, black-oxide coated (MIL-DTL-13924D)
-Anti-glare translucent MagLevel windows on both sides of the body along with a painted indicator on the
spring allows for easy determination of rounds remaining from 1 to 25
-Ribbed gripping surface and new aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage & transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
Other Features: With window
FEATURES
-20 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Additional commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC,
Colt LE901-16S, CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25,
LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington
R-25, Ruger SR-762, S&W M&P10, SIG716, & others*
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring for corrosion resistance
-Ribbed gripping surface and new aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage & transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
Other Features: Gen m3, for sr25/m110, made in usa
FEATURES
-10 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC, Colt LE901-16S,
CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les
Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington R-25, Ruger SR-
762, S&W M&P10, SIG716, & others*
-True 10-round capacity that does not require limiters, pins, rivets, etc.
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring for corrosion resistance
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage and transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
-Elevation adjustment knob – no tools required
-Positive detents in both the up & down positions as well as on the elevation knob
-Standard AR sight height when deployed
Elevation Adjustment:
1 MOA (1.131"/100m) per click with a 14.5" sight radius
0.7 MOA (0.820"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height