Magpul
![]()
FEATURES
-Dedicated two-point sling
-Rapidly adjustable for length (shorter or longer) with new MS1™ Slider
-No tails, loops, or other potential snag hazards
-Lightweight, yet durable hardware made of heavy-duty polymer
-Custom 1-1/4" wide nylon webbing material is strong & wear resistant while remaining anti-chafe for
user comfort
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
-Can be configured for two to one-point convertibility with optional adapters
Other Features: Does not include swivels or hooks-sold seperatly
FEATURES
-Four-piece
-Served as a lightweight, low-profile rail mounted indexpoint for improved weapon control, or as a forward
stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, & one XTM Enhanced Half
Panel
Other Features: Fits 1913 picatinny rails, four piece kit, rail mounted index point or used as a forward stop
FEATURES
-Low-profile
-Two-piece
-Attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories
-Aggressive anti-slip texture
-Dual-side routing clips for retention of light/laser cables
-Each set comes with four (4) two-piece panels, which will cover ONE side of a carbine rail
Other Features: Fits picatinny rails, package of four
FEATURES:
-All steel construction
-Works on any MIL-STD 1913 Picatinny/STANAG 4694 rail
-Case hardened & finished with a ferritic nitrocarburizing process for extreme resistance to wear & corrosion
FEATURES:
-Accepts snap hook style attachments such as HK hooks, MASH hooks, & the Magpul Paraclip™
-Solid cast steel plate
-Durable welded link ring
-Mil-spec black manganese phosphate finish
-Works with both mil-spec & commercial-spec carbine receiver extensions
Note: The ASAP is NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, & MOE® Rifle Stocks.
FEATURES
-Designed specifically for the Hunter 700 Stock & all short action caliber AICS (Accuracy International
Chassis Systems) pattern magazines
-Installs easily with no gunsmithing required*
-Reinforced polymer construction provides durability with light weight
-Large trigger guard allows for use with gloves & accepts most factory & aftermarket curved triggers**
-Steel action screw pillars
-Low-profile, anti-snag ambidextrous magazine release is made of Melonite® treated steel for wear &
corrosion resistance
-Includes one 7.62x51/.308 Winchester PMAG 5 7.62 AC magazine
* Due to potential variability of receiver dimensions, gunsmithing may be required for optimal fit &
functionality.
** Some triggers, especially those with longer and/or straight trigger bows, may not be compatible without
modification to the trigger guard.
Other Features: Drop-in solution for the magpul hunter 700 stock.Allows use of detachable box magazine.Includes pmag 5 ac 7.62x51 magazine.Works with 7.62x51 (308) guns only
FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
Note: Not compatible with the Remington 870 Super Mag.
FEATURES
-Compatible with Remington 870 12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
Note: Not compatible with the Remington 870 Super Mag.
FEATURES
-Compatible with standard Remington 700 pattern short actions with stock Remington hinged floorplates*
-Easily upgradeable to removable AICS-spec magazines (5.56x45 or 7.62x51 pattern) with the affordable
Magpul Bolt Action Magazine Well
-Reinforced polymer shell with Type III hard anodized, machine finished, A380 cast aluminum V-bedding
block
-Accepts ALL factory Remington barrels including aftermarket profiles up to a Medium Palma (0.920" dia.
5.50" forward of the breech)
-Tapered Beam design provides good rigidity through forend & will free-float compatible barrels
-60° grip angle from bore axis
-Adjustable LOP from 13.0”-15.0” with included 0.50” Spacers
-Rubber recoil butt-pad included & optional OEM Butt-Pad Adapter available for use with aftermarket pads
-Accepts factory & most aftermarket triggers
-M-LOK slots on forend sides & bottom for a wide variety of accessory and sling mounting options
-Three dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops
*Note: Fits right-hand receivers only.
All blind floorplate ADL models will require current factory Remington hinged bottom metal or the optional Magpul Bolt Action Magazine Well.
Since factory action mounting screws can come in a variety of lengths, grinding to length or utilizing longer replacements may be necessary to optimize fit with the Hunter 700.
Other Features: Fits remington 700 with short action, cast aluminum bedding block, drop-in, m-lok compatible
FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.
FEATURES
-Compatible with Mossberg 590/590A1*12 ga. shotguns
-Reinforced polymer construction
-Increased length for improved pump manipulation
-Does not overlap receiver for sidesaddle compatibility
-M-LOK slots for direct attachment of accessories
-Installation wrench included
*Note: Not compatible with the optional Mossberg heatshield. Removal is required before use.
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Mossberg 500/590/590A1 12 ga. series shotguns
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Mossberg 500/590/590A1 12 ga. series shotguns
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)
*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.
**Specifications based on factory configuration
Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.
FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)
*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.
**Specifications based on factory configuration
Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.
FEATURES:
-Fixed Length
-Integrated 1.25" sling loops
-Durable polymer construction
-Mil-Spec
-Weight: 9.5 oz
-Black
Other Features: Fits mil-spec buffer tubes, fixed model
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG470
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits commercial buffer tubes
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG471
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Minimalist design provides for a compact & thin profile
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
*Note: Will also fit most 7.62 NATO AR10/SR25 style of rifles.
Other Features: Low profile and compact design with a steeper grip angle.Optimized for short lop rifles
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Designed for use with MOE hand guards & forends
-Attaches directly to these hand guards without any rail needed
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-All mounting hardware included
Other Features: Fits magpul moe hand guards and forends only