Magpul
![]()
FEATURES
-15 round
-Compatible with all compact & sub-compact 9mm Glock handguns*
-Durable, lightweight, & extremely stiff polymer construction
-High visibility controlled-tilt follower
-Long life stainless steel spring for corrosion resistance
-Flared, easily removable floor plate
-Dot matrix panel for magazine marking & identification
-Full magazine indicator windows on both sides of body
-Drops free loaded or unloaded
*Note: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs & tolerances.
Other Features: Compatible with all glock compact and sub-compact handguns with some protrusion below the grip
FEATURES
-5 round
-Compatible with short action AICS (Accuracy International Chassis Systems) pattern bottom metal &
cartridges built on a 0.470" case head such as 7.62x51/.308 Winchester, 7mm-08 Remington, 6.5mm
Creedmoor, .260 Remington, .243 Winchester, & others*
-Accepts a cartridge overall length of up to 2.86"
-5-round capacity, but the follower leg can be easily clipped to increase the capacity by one extra cartridge
-Next-generation impact & crush resistant polymer construction
-Self-lubricating follower for increased reliability
-Long life stainless steel spring
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & is easy to disassemble for maintenance
*Note: Not compatible with smaller base diameter cartridges such as .220 Swift, .223 Remington,
.300 AAC Blackout, etc. or larger short action magnums. In addition, due to the wide variety & potential
combinations of aftermarket receivers, stocks, chassis, & bottom metal that accept AICS pattern mags,
minor fitting may be required. Not compatible with Accuracy International AE rifles.
Other Features: Compatible with aics spec metal bottoms and the magpul bolt action magazine well for the remington hunter 700 magpul stocks
FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops
Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad
FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops
Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad
FEATURES
-Drop-in design compatible with all factory Ruger 10/22 .22 LR receivers
-Reinforced polymer construction for strength & durability
-60° grip angle from bore axis
-Adjustable LOP from 12.5”-14.5” with 0.50” Spacers
-Non-slip rubber butt-pad
-Optional Cheek Riser Kits to raise cheek height 0.25”, 0.50”, or 0.75”
-Reversible barrel tray accepts all factory barrels as well as aftermarket up to 0.920” (12.5" minimum
length)
-Compatible with all capacities of factory Ruger 10/22 magazines
-M-LOK slots on forend sides and bottom for a wide variety of accessory & sling mounting options
-Two dimpled drill points to install optional standard swivel studs (#10-32 x 3/8” long dome stud)
-Push-button QD swivel compatibility in rear with optional Sling Mount Kits
-Left & Right rear 1-1/4” Footman’s Loops
Other Features: Reversible barrel tray accepts all factory lightweight and match bull barrels.Adjustable lop with included spacers and optional cheek risers for comb height adj.M-lok compatible, rubber butt-pad
FEATURES
-17 round
-Compatible with all full-size, compact, and sub-compact 9mm Glock handguns*
-Durable, lightweight, & extremely stiff polymer construction
-High visibility controlled-tilt follower
-Long life stainless steel spring for corrosion resistance
-Flared, easily removable floor plate
-Dot matrix panel for magazine marking & identification
-Full magazine indicator windows on both sides of body
-Drops free loaded or unloaded
*Note: May not be compatible with other platforms designed for use with Glock magazines due to a wide range of magwell designs & tolerances.
Other Features: Compatible with all glock full-size 9mm handguns.Will also fit compact and sub-compact variants with some protrusion below the grip
FEATURES
-Dedicated two-point sling with integrated padded section
-Custom variable-width tubular webbing (1-1/4" to 1-7/8") is strong & wear resistant while remaining
anti-chafe for user comfort
-High-grade, ripstop coated, closed cell foam pad is sewn to the inside of the sling webbing for
protection & strength
-Rapidly adjustable for length (shorter or longer) with new MS1® Slider
-No tails, loops, or other potential snag hazards
-Lightweight, yet durable hardware made of heavy-duty polymer
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
-Can be configured for two to one-point convertibility with optional adapters
Other Features: Does not include swivels or hooks-sold seperatly
FEATURES:
-Custom quick-disconnect sling swivel for 1-1/4" webbing
-Optimized bale shape prevents sling rollover
-Dual side release tabs prevents accidental release
-Melonite™ finished steel for strength & extreme resistance to wear & corrosion
-Fits all standard sized QD cups
-Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for
two to one-point convertible sling
Other Features: Compatible with 1.25" webbing
FEATURES:
-Adapts push-button QD swivel sockets for use with Paraclips & other clip-in sling attachments
-Precision-cast Melonite finished steel for extreme resistance to wear & corrosion
Other Features: Paraclip adapter for push button qd swivel sockets allows use of paraclips
FEATURES:
-Clip-style sling attachment point for 1 1/4" webbing
-Combine with the MS1™ Sling for a dedicated two-point sling, or with MS1 MS3 Adapter or MS1 MS3-QD
Adapter for a two to one-point convertible sling
-Lightweight, yet durable construction with hardened steel & heavy-duty polymer
-Provides weapon quick-release capabilities in an emergency
-Cross-Bolt Lock Bar allows the user to optionally lock the lever closed for extra security
-Steel Paraclip lever is case hardened & finished with Melonite for extreme resistance to wear & corrosion
Other Features: Compatible with asap plate, rsa, msa, m-lok paraclip sling mount and other clip-in sling attachement points
FEATURES:
-Push-button quick-detach sling swivel for 1-1/4" webbing
-Manganese-phosphate finished steel
-Compatible with QD sling attachment points
-Combine with MS1 Sling for dedicated two-point sling, or with MS1 MS4 Adapter for
two to one-pointconvertible sling
FEATURES
-Replacement for AR15/M4 pistol-grip*
-More vertical grip angle than standard A2 grips
-Beavertail backstrap for enhanced ergonomics
-Slimmer thickness for a slightly smaller feel
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Optimized for short length of pull weapons
FEATURES
-Narrow design replaces bulky M4 Carbine-type plastic hand guards
-Easy to install utilizing existing delta ring & round front hand guard retaining cap with A2 front sight
assembly*
-Slots at the two, six, & ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip & long side extensions shields hand from hot sight assembly
Note: The MOE SL Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards & utilizes the existing round front hand guard retaining cap & spring-loaded delta ring.
*Must be used with the triangular A2 front sight assembly with round retaining cap; other gas blocks are not compatible.
Factory sling swivel is not compatible &, if equipped, must be removed from the A2 front sight assembly.
Other Features: Fits ar15 w/carbine length gas system, m-lok accesory slots.
FEATURES
-Narrow design replaces bulky M4 Carbine-type plastic hand guards
-Easy to install utilizing existing delta ring & round front hand guard retaining cap with A2 front sight
assembly*
-Slots at the two, six, & ten o'clock positions for mounting direct-attach M-LOK accessories or M-LOK
1913 Picatinny rail sections
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip & long side extensions shields hand from hot sight assembly
Note: The MOE SL Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards & utilizes the existing round front hand guard retaining cap & spring-loaded delta ring.
*Must be used with the triangular A2 front sight assembly with round retaining cap; other gas blocks are not compatible.
Factory sling swivel is not compatible & , if equipped, must be removed from the A2 front sight assembly.
Other Features: Fits ar15 w/carbine length gas system, m-lok accesory slots.
FEATURES:
-Provides support for all AR-15/M4 upper & lower receivers
-Solidly engages barrel extension with steel lugs
-Full-length steel support shank
-Body made from the same high-quality polymer as other Magpul products
Other Features: Vise block tool for ar assembly operations of barrel nuts, flash hiders etc.Vise not included (required)
FEATURES:
-American-made with US steel
-Heat-treated steel construction with manganese phosphate finish
-USGI barrel nut wrench
-Free-float tube barrel nut wrench
-1/2" torque wrench/breaker bar interface
-Armorer's hammer
-Rifle-length/Entry-length receiver extension wrench
-USGI castle nut wrench*, usable with aftermarket end plates such as the ASAP® and ASAP®-QD
-3/4" wrench for most flash hiders/muzzle brakes
-USGI torque spec references
-Bottle opener
*Note: Not compatible with larger pistol-style receiver extension tubes
Other Features: Made in usa, for mil-spec and pin style barrel nuts, fits standard flash hiders, removes rifle rec.Extentions, carbine castle nuts, works with 1/2 torque wrench (not included)
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, rubber overmolding, optimized for short lop rifles
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, rubber overmolding, optimized for short lop rifles
FEATURES:
-Accepts any push-button QD sling swivel as well as the Magpul QDM
-Durable steel construction
-Case hardened & finished with Melonite™ for extreme resistance to wear & corrosion
-Works with both mil-spec & commercial-spec carbine receiver extensions (buffer tubes)
Note: The ASAPQDis NOT compatible with A1/A2 fixed stocks as well as any other similarly mounted stock such as the Magpul PRS®, UBR®, & MOE® Rifle Stocks.
FEATURES
-All steel construction
-Case hardened & finished with Melonite™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail
-Windage adjustable with low-profile knob – no tools required
-Elevation adjustment wheel for 200-600 meter distances in 50 meter increments*
-Positive detents in both the up & down positions
-Standard AR sight height when deployed
Elevation Adjustment:
0.5 MOA (0.566"/100m) per click with a 14.5" sight radius
0.4 MOA (0.410"/100m) per click with a 20" sight radius
*Note: The 200-600 m elevation adjustment wheel is a hybrid calibration taking into consideration CALIBERS (5.56 and 7.62 NATO), CARTRIDGES (M855, M193, Mk262, TSX 55gr, M80, M118LR), BULLET WEIGHTS (55-77gr for 5.56 and 147-175gr for 7.62), BARREL LENGTHS (14.5-20"), SIGHT RADIUS (14.5-20" for 5.56 and 18-20" for 7.62), POINT OF IMPACT DISCREPANCY (+2.5" to -5.0"), and assuming standard temperature and pressure.
Other Features: Elevation adjustable
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail
-Windage adjustable with low-profile knob – no tools required
-Positive detents in both the up & down positions
-Standard AR height over bore when deployed, 45° offset right-hand side
Elevation Adjustment:
0.5 MOA (0.566"/100m) per click with a 14.5" sight radius
0.4 MOA (0.410"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
-Elevation adjustment knob – no tools required
-Positive detents in both the up & down positions as well as on the elevation knob
-Standard AR height over bore when deployed, 45° offset right-hand side
Elevation Adjustment:
1 MOA (1.131"/100m) per click with a 14.5" sight radius
0.7 MOA (0.820"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Drop-in upgrade for AK47/AK74 pistol grips*
-Fits both milled & stamped receivers, including those with grip reinforcement plates
-One-piece reinforced polymer construction
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: Due to the wide range of tolerances of AK receivers, some custom fitting of the grip may be necessary.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, optimized for short lop rifles
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, optimized for short lop rifles
FEATURES
-Replacement for AR15/AR10 pistol-grip*
-Removable and replaceable front and rear straps for a custom fit over multiple hand sizes
-Improved ergonomics and positive anti-slip texture on both sides and rear back-strap
-Removable inner core holds a reusable 1/2 fl. oz. lubrication bottle (oil not included)
-Custom waterproof storage of batteries (AA/AAA or CR123A) or spare bolt/firing pin (AR15/M4) is
available with optional Storage Cores
-Each kit includes three backstrap sizes (S,M,L), two frontstraps (A1 and A2 style), lubrication bottle core,
and dual-drive mounting screw
*Note: This TYPE 1 Kit fits all AR15/M4's as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716.
In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function.
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Paraclip™ shackle allows for fast transition between one-point & two-point configuration
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with receivers, end plates, & buttstocks that have a QD socket for one-point attachment.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.With single qd sling swivel
FEATURES
-Fast transition between one-point & two-point configuration
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Symmetrical Paraclip™ shackles allows for easy transition & provides weapon quick-release capabilities
in an emergency
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with the Magpul ASAP® for optimal shoulder transitioning in one-point mode as well as the
SGA™ Receiver Sling Mount. Also compatible with many snap-hook style sling loops* & standard or QD
sling swivels.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.
FEATURES
-Fast transition between one-point & two-point configuration
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Symmetrical Paraclip™ shackles allows for easy transition & provides weapon quick-release capabilities
in an emergency
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with the Magpul ASAP® for optimal shoulder transitioning in one-point mode as well as the
SGA™ Receiver Sling Mount. Also compatible with many snap-hook style sling loops* & standard or QD
sling swivels.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.