Magpul
![]()
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Designed for use with MOE hand guards & forends
-Attaches directly to these hand guards without any rail needed
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-All mounting hardware included
Other Features: Fits magpul moe hand guards and forends only
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"
Other Features: Fits 1913 picatinny rails
FEATURES
-20 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Additional commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC,
Colt LE901-16S, CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25,
LaRue OBR, Les Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington
R-25, Ruger SR-762, S&W M&P10, SIG716, & others*
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring for corrosion resistance
-Ribbed gripping surface and new aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage & transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
Other Features: Gen m3, for sr25/m110, made in usa
FEATURES
-10 round capacity
-Optimized for use with SAAMI-spec 7.62x51/.308 Winchester ammunition
-Commercial rifle compatibility includes the new Armalite AR-10A, Bushmaster .308 ORC, Colt LE901-16S,
CORE Rifle Systems CORE30, DPMS LR308, JP Enterprises LRP-07, KAC SR25, LaRue OBR, Les
Baer .308, LMT .308 MWS, LWRCI REPR, Mega Arms MATEN, POF P-308, Remington R-25, Ruger SR-
762, S&W M&P10, SIG716, & others*
-True 10-round capacity that does not require limiters, pins, rivets, etc.
-Next-generation impact & crush resistant polymer construction
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-High-quality stainless steel spring for corrosion resistance
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many pouches
-Multi-use Impact/Dust Cover minimizes debris intrusion and protects cartridges from potential damage
during storage and transit
*Note: NOT compatible with Armalite AR-10B, Noveske N6, Springfield Armory M1A, Rock River Arms LAR8, FN SCAR 17S, PTR-91, HK417 or any other rifles that utilize M14, FN FAL, or HK 91/G3 patterned magazines.
FEATURES
-All steel construction
-Case hardened & finished with Melonite QPQ™ for extreme resistance to wear & corrosion
-Mounts on any MIL-STD-1913 Picatinny/STANAG 4694 rail including receiver-height gas blocks
-Elevation adjustment knob – no tools required
-Positive detents in both the up & down positions as well as on the elevation knob
-Standard AR sight height when deployed
Elevation Adjustment:
1 MOA (1.131"/100m) per click with a 14.5" sight radius
0.7 MOA (0.820"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to MIL-STD-1913 Picatinny/STANAG 4694 receiver rail & provides the same height-over-bore
as standard A2 irons
-Protective wings shield the dual, same plane flip apertures
-Sight can still be folded with either large or small aperture in position
-Detent knob easily & positively adjusts windage
Elevation Adjustment:
0.7 MOA (0.754"/100m) per click with a 14.5" sight radius
0.5 MOA (0.547"/100m) per click with a 20" sight radius
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height
FEATURES
-Impact-resistant polymer construction provides light weight & resists operational abuse
-Spring-loaded flip up sight easily activated from either side or by pressing the top
-Detent & spring pressure keeps sight erect but allows for unobstructed folding under impact, etc.
-Clamps to most any MIL-STD-1913 Picatinny/STANAG 4694 railed hand guard* & provides the
same height-over-bore as standard A2 irons
-Protective wings shield the spring-locking A2 front sight post
-Elevation adjustment tool included, but most aftermarket A2 front sight adjustment tools may be
used as well
Elevation Adjustment:
1.6 MOA (1.886"/100m) per click with a 14.5" sight radius
1.2 MOA (1.367"/100m) per click with a 20" sight radius
*Note: Cannot be mounted to a railed gas block due to excess heat issues. Front MBUS must be mounted to a railed fore end on the same plane as the receiver rail. Because of this the sight is also not compatible with MOE Hand Guards.
Other Features: Designed as a back-up sight for emergency situations.Mounts to picatinny rails.Handguard height
FEATURES
-40 round capacity
-For 5.56x45 NATO (.223 Remington)
-Next-generation impact & crush resistant polymer construction
-Modified dimensions allow for wider compatibility with non Colt-spec platforms
-Constant-curve internal geometry for smooth feeding
-Anti-tilt, self-lubricating follower for increased reliability
-Long life stainless steel spring
-Over-travel insertion stop on the spine
-Ribbed gripping surface and new aggressive front & rear texture for positive magazine handling
-Paint pen dot matrix panels on the bottom of the body to allow for identification marking
-Flared floorplate aids magazine handling & disassembly yet is slim enough for use with many double &
triple pouches
-Pop-off Impact/Dust Cover to minimize debris intrusion & for ammunition protection in storage & transit
FEATURES
-5 pack
-5.56x45 (.223 Remington)
-Made from proprietary hard polymer
Other Features: 10rd magazine in a 30rd body
FEATURES
-3 pack
-For 5.56 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal
Other Features: Fits most ar-15 magazines
FEATURES
-3 pack
-For 7.62 NATO
-Provides improved speed & controllability during high stress, tactical magazine changes
-Durable synthetic rubber loop with recessed rough gripping surface
-Quick & easy installation & removal
Other Features: Fits most ar-10 & sr25 magazines
FEATURES
-Low-profile 1913 Picatinny rail coverage
-Easily cut for custom lengths
-The semi-rubbery material offers improved weapon control & rail protection
-Sections can mount next to each other to form a visually continuous cover
-Each panel fits one side of a carbine-length rail
-One panel per package
Other Features: Fits picatinny rails, one per package
FEATURES
-Very low-profile 1913 Picatinny rail coverage
-Made of Santoprene material, a rubbery surface whichoffers improved weapon control & rail protection
-Easily cut for custom lengths
-Each panel fits one side of a carbine-length rail (18 slots)
-One panel per package
Other Features: Fits picatinny rails, one per package
FEATURES
-Drop-in replacement for the aluminum USGI 30-round magazine black or green follower
-4-way tilt design for increased feeding reliability
-Made from a non-hygroscopic & self-lubricating polymer
Note: Will not fit the latest generation USGI spring that is utilized with a tan follower.Also not optimized for thin-walled steel-bodied magazines.
Other Features: Fits most spec usgi aluminum magazines.Self-leveling design is a big improvement over the usgi follower.
Other Features: Indicator windows at 10, 20, 30, and 35rd intervals, made in usa