Magpul
![]()
FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)
*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.
**Specifications based on factory configuration
Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 4" recommended)
-All mounting hardware included
-Height, over rail: 1.75"
-Width, maximum: 1.77"
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with 1913 Picatinny railed hand guards
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-Includes all mounting hardware plus a universal mounting rail for custom fitting to
many factory plastic hand guards
Other Features: Fits 1913 picatinny rails
FEATURES
-Designed for use with MOE hand guards & forends
-Attaches directly to these hand guards without any rail needed
-Shape is ergonomically designed for use as a traditional vertical grip
-Optimized for use with the "thumb break method" of shooting
-All mounting hardware included
Other Features: Fits magpul moe hand guards and forends only
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Polymer three-piece design with an interchangeable finger shelf that allows for a flat "A1-style"
surface or an "A2-style" finger nub
-Mounts to MIL-STD-1913 Picatinny and NATO STANAG 4694 rails (min. of 3" recommended)
-Shorter in overall length & width compared to the original AFG
-All mounting hardware included
-Height, over rail: 1.94"
-Width, maximum: 1.37"
Other Features: Fits 1913 picatinny rails slim line design of the afg
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-Beavertail backstrap for enhanced ergonomics
-Positive anti-slip texture
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction with wrap-around rubber overmolding
-Beavertail backstrap for enhanced ergonomics
-Hard polymer bottom edge to reduce equipment snags or grip damage
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES:
-Enhanced polymer drop in replacement for the AR-15/M4 weapons platform
-Features a shallow "V" shape for better use of gloves in tactical shooting or cold weather operations
-Non-folding
-Fills the "gap" at the rear of the standard trigger guard
-Also works well with most 7.62x51 AR platforms, but some custom fitting may be required
-All mounting hardware included
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES
-Replaces standard M4 Carbine-type plastic hand guards
-Compatible with most piston-driven as well as 'direct impingement' gas systems
-Easy to install utilizing existing delta ring and round or triangular front hand guard retaining cap
-M-LOK slots at the two, six, and ten o'clock positions for mounting MIL-STD-1913 Picatinny rails or other
direct-attach M-LOK accessories
-Reinforced, heat-resistant polymer construction
-Integral riveted aluminum heat shield
-Front lip and side extensions, shields hand from hot gas block
-Relieved area at the top rear accommodates many overhanging optic mounts
Note: The MOE M-LOK Hand Guard – Carbine-Length is a direct replacement for M4 Carbine-type plastic, two-piece hand guards and utilizes the existing front hand guard retaining cap and delta ring.
Other Features: Fits ar15 w/carbine length gas system
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Minimalist design provides for a compact & thin profile
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
*Note: Will also fit most 7.62 NATO AR10/SR25 style of rifles.
Other Features: Low profile and compact design with a steeper grip angle.Optimized for short lop rifles
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Ambidextrous, user-configurable buttstock
-Designed to add adjustability to the Remignton 870 12 ga. shotgun
-Spacer system for length of pull adjustment
-Improved grip ergonomics
-Recoil-reducing buttpad
FEATURES
-Mounts on mil-spec sized carbine receiver extension tube (not included) from manufacturers such as
Colt, Armalite, S&W, LMT, & others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a commercial-spec extension on your rifle, make sure to order #MAG471
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on standard-length (flat-back) M4 Carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits mil-spec buffer tubes
FEATURES
-Mounts on commercial-spec sized carbine receiver extension tube (not included) from manufacturers
such as Bushmaster, DPMS, Olympic, and others (please see the note below)
-Two water-resistant battery storage tubes located on the left & right sides of the stock
-Each tube will store up to two (2) CR123A lithium or AA batteries
-Tubes are accessible from the rear in any stock position via a hand-removable rubber plug
-Supplemental friction lock minimizes accuracy robbing wobble*
-Premium chrome-silicon lock spring provides positive locking & long service life
-Sloping cheek weld provides a wide contact surface for user comfort
-Shielded release latch prevents snagging & accidental operation
-Replaceable 0.30" Rubber Butt-Pad offers an anti-slip surface & increases impact protection
-Compatible with Magpul ASAP®,ASAP® QD, & other receiver-mount sling attachments
-Sling Mounts
-Rear -Reversible Type 1 Sling Mount fits up to 1.5" push-button QD swivels (swivel not included)
-Rear/Bottom - 1.25" sling loops
Note: There are two basic sizes of M4 Carbine receiver extensions (buffer tubes): mil-spec & commercial-spec. If you have a mil-spec extension on your rifle, make sure to order #MAG470
* Friction lock performance may vary depending on the host receiver extension's dimensional tolerances.
** Specifications based on extended-length (slant-back) commercial-spec carbine receiver extension & may vary depending on tube manufacturer.
Other Features: Fits commercial buffer tubes
FEATURES:
-Fixed Length
-Integrated 1.25" sling loops
-Durable polymer construction
-Mil-Spec
-Weight: 9.5 oz
-Black
Other Features: Fits mil-spec buffer tubes, fixed model
FEATURES
-Mounts on a durable custom Receiver Extension tube (included) to accommodate the common
M4 carbine buffer & spring as well as aftermarket A5 buffer systems*
-Solid "fixed stock" lockup & consistent cheek weld in all positions
-9-Position LOP adjustability
-Adjustment lever requires only gross motor movement to operate yet the entire stock remains
streamlined & anti-snag
-Enhanced lock mechanism with dual locking pawls for maximum drop strength & shock resistance
-Multi-shell construction provides solid foundation & shields critical operating parts from penetration
damage
-Sloping cheek weld combines a slim profile with user comfort
-Storage Compartment in tail of stock is removable & the door is reversible for user preference
-Rubber butt-pad offers an anti-slip surface & increases impact protection
-Rollover on the toe allows for easier shoulder transitions & better fit when using body armor
-Sling Mounts
-Front - QD swivel mount for ambidextrous one-point QD sling mounting
-Left/Right Rear-Rotation-limited QD swivel sling mounts fit up to 1.5" push-button swivels
included)
-Bottom - 1.25" sling loop (additional loop accessible when Storage Compartment is removed)
*The UBR GEN2 includes the required custom Receiver Extension tube, Buffer Spacer, & all mounting hardware. A carbine buffer and spring (M4 or SR25 length) or A5 buffer & spring are required for use with the UBR & are not included.
**Specifications based on factory configuration
Other Features: Mounts on receiver extension tube (included), uses standard carbine buffers and springs with included spacer, or a5 buffers and springs install requires removal of buffer tube.Buffer and spring required but not included.
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Four-piece
-Served as a lightweight, low-profile rail mounted indexpoint for improved weapon control, or as a forward
stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle
-Kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, & one XTM Enhanced Half
Panel
Other Features: Fits 1913 picatinny rails, four piece kit, rail mounted index point or used as a forward stop
FEATURES
-Dedicated two-point sling
-Rapidly adjustable for length (shorter or longer) with new MS1™ Slider
-No tails, loops, or other potential snag hazards
-Lightweight, yet durable hardware made of heavy-duty polymer
-Custom 1-1/4" wide nylon webbing material is strong & wear resistant while remaining anti-chafe for
user comfort
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
-Can be configured for two to one-point convertibility with optional adapters
Other Features: Does not include swivels or hooks-sold seperatly
FEATURES
-Fast transition between one-point & two-point configuration
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Symmetrical Paraclip™ shackles allows for easy transition & provides weapon quick-release capabilities
in an emergency
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with the Magpul ASAP® for optimal shoulder transitioning in one-point mode as well as the
SGA™ Receiver Sling Mount. Also compatible with many snap-hook style sling loops* & standard or QD
sling swivels.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.
FEATURES
-Fast transition between one-point & two-point configuration
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Symmetrical Paraclip™ shackles allows for easy transition & provides weapon quick-release capabilities
in an emergency
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with the Magpul ASAP® for optimal shoulder transitioning in one-point mode as well as the
SGA™ Receiver Sling Mount. Also compatible with many snap-hook style sling loops* & standard or QD
sling swivels.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Lightweight, yet durable hardware made with hardened steel & heavy-duty polymer
-Paraclip™ shackle allows for fast transition between one-point & two-point configuration
-Cross-Bolt Lock Bar in each Paraclip allows the user to optionally lock its lever closed for extra security
-Steel Paraclip levers are case hardened & finished with a ferritic nitrocarburizing process for extreme
resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear - Works with receivers, end plates, & buttstocks that have a QD socket for one-point attachment.
-Front - Compatible with the Magpul RSA®, MSA™, & Forward Sling Mount, as well as many snap-hook
style sling loops* & standard or QD sling swivels for use in two-point mode.
* Snap-hook style sling loops with an inner diameter of at least 3/8" are required, but 9/16" and larger will
provide full range of motion.
Other Features: Fast transition between one-point and two-point.With single qd sling swivel
FEATURES
-Heavy-duty push-button QD sling swivel for one-point attachment
-Durable, precision-cast steel QD D-ring allows for quick transition from one to two-point mode & is finished
with Melonite for extreme resistance to wear & corrosion
-Custom 1.25 inch wide nylon webbing material is strong & wear resistant while remaining anti-chaff for
user comfort
-Low-profile adjustment Slider for adding or removing sling tension in two-point mode with a single-hand
-Colored webbing has Near Infrared (NIR) treatment to reduce IR signature
Sling Mounting:
-Rear/Front - Compatible with buttstocks, end plates, receivers, & hand guards that have a QD socket as
well as the Magpul ASAP®-QD, RSA®-QD, MSA™-QD, & shotgun Forward Sling Mounts.
Other Features: Fast transition between one-point and two-point.With dual qd sling swivels
FEATURES
-Replacement for AR15/M4 pistol-grip*
-One-piece reinforced polymer construction
-More vertical grip angle than standard A2 grips
-Unique backstrap design for proper trigger finger placement
-Aggressive TSP texture (Trapezoidal Surface Projections) for positive weapon control in all environments
-Includes a basic grip cap, but accepts optional Storage Cores for customized gear stowage
*Note: This grip will function properly with 7.62 NATO AR10/SR25 style of rifles but, depending on the make of the rifle, may or may not leave a gap between the backstrap's 'beaver tail' & the receiver. This gap is purely aesthetic & will not affect function.
Other Features: Aggressive texture for positive weapon control, optimized for short lop rifles
FEATURES
-Replacement for AR15/AR10 pistol-grip*
-Removable and replaceable front and rear straps for a custom fit over multiple hand sizes
-Improved ergonomics and positive anti-slip texture on both sides and rear back-strap
-Removable inner core holds a reusable 1/2 fl. oz. lubrication bottle (oil not included)
-Custom waterproof storage of batteries (AA/AAA or CR123A) or spare bolt/firing pin (AR15/M4) is
available with optional Storage Cores
-Each kit includes three backstrap sizes (S,M,L), two frontstraps (A1 and A2 style), lubrication bottle core,
and dual-drive mounting screw
*Note: This TYPE 1 Kit fits all AR15/M4's as well as many 7.62x51 variants such as the Aero Precision M5 308, CMMG MK3, CORE Rifle Systems CORE30, HK 417/MR762A1, LWRCI REPR, Mega Arms MATEN, POF P-308, Ruger SR-762, and SIG716.
In general, the TYPE 1 Kit will fit most all 7.62x51 AR lower receivers but there may or may not be a gap between the backstrap's 'beavertail' and the receiver. This gap is purely aesthetic and will not affect function.
FEATURES
-Low-profile
-Two-piece
-Attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories
-Aggressive anti-slip texture
-Dual-side routing clips for retention of light/laser cables
-Each set comes with four (4) two-piece panels, which will cover ONE side of a carbine rail
Other Features: Fits picatinny rails, package of four