Lee

FEATURES
-.365 diameter
-95 grain
-Roud nose bullet
-Suitable for cartridges like9mm Makarov
-Handles included

FEATURES
-Six Cavity Mold
-.356 Diameter
-124 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

FEATURES
-.452 diameter
-200 grain
-Semi Wad cutternose bullet
-Suitable for cartridges like.45 ACP, .45 Colt
-Handles included

FEATURES
-For .338 Lapua Magnum
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

FEATURES
-Double Cavity Mold
-Produces a .562 diameter ball
-266.46 grains
-Hard anodized sprue plate
-Includes handles

FEATURES
-Six Cavity Mold
-.225 Diameter
-55 grain
-Round nose bullet
-Suitable for cartridges like .22 caliber
-Lube & handles sold separately

FEATURES
-Quick trim die for .45-70 Government

FEATURES
-Six Cavity Mold
-.356 Diameter
-125 grain
-Round nose bullet
-Suitable for cartridges like 9mm Luger, .38 Super Auto, etc.
-Lube & handles sold separately

FEATURES
-Double Cavity Mold
-Produces a .535 diameter ball
-229.87 grains
-Includes handles

FEATURES
-Produces a gas checked .277 diameter 135 grain round
-Flat bullet
-Suitable for .270 caliber cartridges
-Handles included

Features:
-Can be used in conjunction with the Classic Powder Measure & the Auto Drum Powder Measure
-All drums are infinitely adjustable within range
-No tools are required for adjustment
-A graduated adjustment key is included with each drum
-Each turn of the adjusting screw is .1 cc or about 1 grain of powder
-Each key is marked with .01 cc graduations, allowing easy 1/10 grain powder adjustments

Includes 4 precision molded nylon drums:
(2) Small Drums for charging .25 ACP to .223 Remington
(2) Large Drums for charging the .223 Remington to Large Magnums
Also include an insert to allow reduced capacity charging similar to smaller drum

FEATURES
-Produces a gas checked .225 diameter 55 grain round
-Flat bullet
-Suitable for .22 caliber cartridges
-Handles included

FEATURES
-For .380 Auto
-4-die set
-Carbide full length die
-Bullet seating die
-Powder thru expanding die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES
-Full length 2 die set for .223 Winchester Super Short Magnum
-Full length sizing die
-Bullet seating die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES
-Double Cavity Mold
-Produces a .457 diameter ball
-143.28 grains
-Includes handles

FEATURES
-For .300 AAC Blackout
-Case Length Gauge
-Precise, easy way to trim to length & square the case mouth
-Used with the Cutter & Lock Stud or Zip Trim

FEATURES
-Quick trim die for .300Winchester Magnum

FEATURES
-Quick trim die for .204 Ruger

FEATURES
-Double Cavity Mold
-Produces a .440 diameter ball
-127.87 grains
-Includes handles

FEATURES
-Lee Quick Trim Die
-17 Remington
-This die body works with Lee's Deluxe Quick Trim Case Trimmer to quickly and precisely trim brass to the correct length at the same time it chamfers the inside and outside of the case mouth.
-No calipers, measurement or adjustment required.
-Simply install the appropriate quick trim die in your press and start trimming

Features:
-Hopper holds 1/2 pound of powder
-Elastomer wiper & Teflon coated metal casting
-Will not cut powder & almost totally eliminates leakage
-Large hopper with shut-off valve is attached with brass thumb nuts for convenience in disk changing
-Increased safety with pull-back lever
-Includes swivel adapter & spring return lever with spring & all 4 disks

Includes 4 disks to adjust your charges with:
Disk A = .30 to .43 cc
Disk B = .46 to .66 cc
Disk C = .71 to 1.02 cc
Disk D = 1.09 to 1.57 cc

FEATURES
-Pacesetter 3 die set for 6.8 Remington Special
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES:
-Only holds New Auto-Prime & Ergo-Prime
-Holds 18 priming tool shell holders

FEATURES
-Double Cavity Mold
-Produces a .390 diameter ball
-89.05 grains
-Includes handles

FEATURES
-Flat Die Box
-Made of durable red plastic
-Holds 4 dies

FEATURES:
-Caliber: 30 Carbine
-Factory Crimp
-Threads: 7/8" - 14

FEATURES
-Double Cavity Mold
-Produces a .375 diameter ball
-79.16 grains
-Includes handles

FEATURES
-Quick trim die for 7.5x55 Swiss

FEATURES
-Double Cavity Mold
-Produces a .360 diameter ball
-70.04 grains
-Includes handles

FEATURES
-Quick trim die for .280 Remington

FEATURES
-Pacesetter 3 die set for .458 Socom
-Full length sizing die
-Bullet seating die
-Factory crimp die
-Universal shell holder
-Powder dipper
-Instructions/load data

FEATURES
-Quick trim die for .300 H&H Magnum & .300 Rum