Hornady

FEATURES:
-Caliber/Type9MM XTP®
-Diameter .355"
-Weight147 gr.
-Ballistic Coefficient .212
-Sectional Density .167
-Precise serrations divide the XTP® into symmetrical sections.
-Total uniformity of core density ensures balanced expansion as well as in-flight stability.
-Expansion is controlled by varying jacket thickness down the length of the XTP®.
-On revolver bullets, the cannelure helps achieve accurate, consistent, crimping.

FEATURES:
-Caliber/Type:.38 Cal.SWC-HP
-Diameter: .358"
-Weight:158 gr.
-Ballistic Coefficient: .139
-Sectional Density: .176
-Hornady® lead bullets are pre-lubricated and cold-swaged for total uniformity and balance
-Traditional conical and flat designs have perfect symmetry when combined with knurling at the base of the
bullet

FEATURES:
-Caliber/Type:.38 Cal.LRN
-Diameter: .358"
-Weight:158 gr.
-Ballistic Coefficient: .159
-Sectional Density: .176
-Hornady® lead bullets are pre-lubricated and cold-swaged for total uniformity and balance
-Traditional conical and flat designs have perfect symmetry when combined with knurling at the base of the
bullet

FEATURES:
-Caliber/Type22 Cal. V-MAX®
-Diameter .224"
-Weight60 gr.
-Ballistic Coefficient .265
-Sectional Density .171
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type6MM V-MAX®
-Diameter .243"
-Weight58 gr.
-Ballistic Coefficient .250
-Sectional Density .140
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type22 Cal.BTHP Match™
-Diameter .224"
-Weight52 gr.
-Ballistic Coefficient .229
-Sectional Density .148
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type22 Cal.HP Match™
-Diameter .224"
-Weight53 gr.
-Ballistic Coefficient.218
-Sectional Density .151
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type22 Cal.SP W/C
-Diameter .224"
-Weight55 gr.
-Ballistic Coefficient .235
-Sectional Density .157
-Streamlined design for ultra flat trajectories.
-Match grade jacket design provides maximum accuracy at all ranges.
-Explosive expansion, even at low velocities.

FEATURES:
-Caliber/Type270 Cal. V-MAX®W/C
-Diameter .277"
-Weight110 gr.
-Ballistic Coefficient .370
-Sectional Density .205
-The polymer tip increases the ballistic coefficient and also initiates dramatic expansion upon impact
-Hornady® combines the sharp, pointed polymer tip with the most aerodynamic profile
-Utilizing the proper base design provides incredible in-flight stability for long-range shooting.

FEATURES:
-Caliber/Type22 Cal.BTHP Match™
-Diameter .224"
-Weight75 gr.
-Ballistic Coefficient .395
-Sectional Density .214
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber: 30 Cal .308"
-FMJ
-125 grain
-Ballistic Coefficient: .250
-100/box

FEATURES:
-Caliber/Type30 Cal.SP
-Diameter .308"
-Weight150 gr.
-Ballistic Coefficient .338
-Sectional Density .226
-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES:
-Caliber/Type30 Cal.BTHP Match™
-Diameter .308"
-Weight168 gr.
-Ballistic Coefficient .450
-Sectional Density .253
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.
-Match bullets are not recommended for hunting.

FEATURES:
-Caliber/Type30 Cal.BTSP
-Diameter .308"
-Weight180 gr.
-Ballistic Coefficient .425
-Sectional Density .271
-Inner Grooves, Strategically weaken the upper section of the jacket.
-Tapered Jacket, Jacket thickness is precisely controlled for expansion at all velocities.
-One-Piece Core, Does not separate like divided cores. The InterLock® retains more mass and energy.
-Cannelure, Provides accurate and consistent crimping and also works with InterLock® ring.
-InterLock® Ring, The raised InterLock® ring is embedded in the bullet’s core.

FEATURES:
-Caliber: 30 Cal .308"
-A-TIP™ Match
-250 grain
-Ballistic Coefficient: .442
-100/box

FEATURES:
-Designed to fit Hornady® Custom Grade™ Dies, & are machined to fit the profile of the A-Tip bullets to seat
them as precisely as possible w/out damaging bullets
-Not compatible w/ other manufacturer's dies

FEATURES:
-Caliber/Type50 Cal.A-MAX®
-Diameter .510"
-Weight750 gr.
-Ballistic Coefficient 1.050
-Sectional Density .412
-The low-drag and uniform point raises the ballistic coefficient.
-The geometric profile works to produce low drag and flatter trajectories.
-The jacket has virtually zero tolerance for concentricity and near zero wall thickness variation.
-The angle and length of the boattail is unique to each caliber and weight of Match™ and A-MAX® bullets.

FEATURES:
-Caliber/Type:.50Cal.XTP® Mag™
-Diameter: .500"
-Weight:350gr.
-Ballistic Coefficient: .145
-Sectional Density: .200
-XTP® Mag™ bullet provide the same controlled expansion, accuracy and dependability as regular XTP®'s,
but are built to withstand the higher velocities and impacts from ultra-powerful, magnum handguns

FEATURES:
-Caliber/Type45 Cal.MonoFlex®
-Diameter .458"
-Weight250 gr.
-Ballistic Coefficient .175
-Sectional Density .170
-Patented Flex Tip® Design, Safe to use in all tubular magazines.
-Copper Alloy Construction, One-piece copper alloy won’t separate.
-Ballistically Efficient Secant Ogive Profile, Delivers the flattest possible trajectories from lever guns.

FEATURES:
-Two multi caliber pilots allows for flash hole uniformity on cases from .224 up to .375
-Chamfer/Deburr depth stop for consistency from case to case
-Free floating pilots to guide the cutter directly towards the flash hole

FEATURES:
-Caliber/Type38 Cal.FTX®
-Diameter .357"
-Weight140 gr.
-Ballistic Coefficient .160
-Sectional Density .157
-Design, Patented Flex Tip design is safe in all tubular magazines.
-Technology, Flex Tip technology delivers controlled expansion across a broad range of velocities.
-Trajectory, Delivers the flattest trajectories EVER from lever guns.
-Jacket, Jacket design controls expansion and enhances accuracy.

FEATURES:
-Shell holder #16
-Precision machined from solid steel then heat treated to perform flawlessly for the life of the press

FEATURES:
-Shell holder #1
-Precision machined from solid steel then heat treated to perform flawlessly for the life of the press

FEATURES
-#6 Shell Plate
-Will hold additional calibers with the same case head dimensions
-Designed to fit Lock-N-Load AP(both EZ-Ject & wire ejector models) & Pro-Jector presses

FEATURES:
-Caliber/Type38 Cal.XTP®
-Diameter .357"
-Weight125 gr.
-Ballistic Coefficient .151
-Sectional Density .140
-Precise serrations divide the XTP® into symmetrical sections.
-Total uniformity of core density ensures balanced expansion as well as in-flight stability.
-Expansion is controlled by varying jacket thickness down the length of the XTP®.
-On revolver bullets, the cannelure helps achieve accurate, consistent, crimping.